Specifications

2626
2626
26
MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
www.malighting.de eMail: [e-mail]
55
55
5
11
11
1
22
22
2
22
22
2
33
33
3
44
44
4
66
66
6
77
77
7
88
88
8
99
99
9
1010
1010
10
2.52.5
2.52.5
2.5
Setting DMX Addresses for DimmersSetting DMX Addresses for Dimmers
Setting DMX Addresses for DimmersSetting DMX Addresses for Dimmers
Setting DMX Addresses for Dimmers
Activate PATCH in the SETUP menu.
The button DIMMER PATCH will lead you to the menu EDIT DIMMER PATCH
1 Select the first dimmer channel with a right mouse click.
TIPTIP
TIPTIP
TIP
If several dimmer channels are addressed one by one, these can be selected in one by pushing and holding the left
mouse button (draw loop) in the DMX ADDRESS column. Once the dimmer channels have been selected (red
background), a right mouse click in the marked column will open the PATCH DIMMER window.
2 Set the DMX output A to H via keyboard.
Set the DMX channel via keyboard; confirm with ENTER.
Or:Or:
Or:Or:
Or:
Set the DMX output A to H by a left mouse click. Move the blue bar by holding left mouse button, until the desired
address appears on the left. Confirm figure with a left mouse click and the chosen figure will be displayed. Repeat
these steps for each dimmer channel.
Assigning the DMX sockets
àà
àà
à
2.7 2.7
2.7 2.7
2.7 DMX output and Ethernet configuration
Outputs E to H are only available with an optional channel expansion to 4096 channels. For the expansion,
an upgrade is necessary. As of serial number 156, a dongle (hardware protection) has to be installed within
the grandMA; for serial numbers under SN 156, a plug-in card has to be exchanged.
For this operation,For this operation,
For this operation,For this operation,
For this operation,
the unit has to be opened by a qualified technician. CAUTION: unplug the mains plugthe unit has to be opened by a qualified technician. CAUTION: unplug the mains plug
the unit has to be opened by a qualified technician. CAUTION: unplug the mains plugthe unit has to be opened by a qualified technician. CAUTION: unplug the mains plug
the unit has to be opened by a qualified technician. CAUTION: unplug the mains plug
first!first!
first!first!
first!
3 To erase DMX address of selected dimmer channel.
4 When the MULTI PATCH button is pressed (buttons background color changes from light gray to dark gray), you can
address several DMX output channels for a Fixture channel.
When the TEST OUT button is pressed (dark background), the selected DMX output channel is temporarily set to 100
percent. Doing so, you can find a patched channel much faster within the stage setting.
2.5 Setting DMX Addresses for Dimmers