Specifications
2424
2424
24
MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
www.malighting.de eMail: info@malighting.de
1010
1010
10
1111
1111
11
11
11
1
33
33
3
11
11
1
44
44
4
11
11
1
22
22
2
44
44
4
55
55
5
66
66
6
77
77
7
11
11
1
88
88
8
99
99
9
22
22
2
22
22
2
33
33
3
11
11
1
55
55
5
2.42.4
2.42.4
2.4
Selecting DMX Addresses for FixturesSelecting DMX Addresses for Fixtures
Selecting DMX Addresses for FixturesSelecting DMX Addresses for Fixtures
Selecting DMX Addresses for Fixtures
Activate PATCH in the Setup menu.
1 Select the respective fixture in the DMX 1 column by a right mouse click. The PATCH FIXTURES window will appear.
TIPTIP
TIPTIP
TIP
If several fixtures are addressed one by one, these can be selected in one by clicking and holding the left mouse
button (draw loop) in the DMX 1 column. Once the fixtures have been selected (red background), a right mouse
click in the marked column will open the window PATCH FIXTURES.
2 Set the DMX output A to H via keyboard. Enter the DMX channel via the keyboard and confirm with ENTER.
Or:Or:
Or:Or:
Or:
Set the DMX output A to H by a left mouse click. Move the red bar by holding the left mouse button until the desired
address appears on the left. Activate by a left mouse click and data will be stored. Repeat these three steps for each
fixture.
Assigning the DMX sockets
àà
àà
à
2.7 2.7
2.7 2.7
2.7 DMX output configuration
Output E to H is only possible with an optional channel expansion to 4096 channels. For the expansion, an
upgrade is necessary. As of serial number 156, a dongle (hardware protection) has to be installed within the
grandMA; for serial numbers under SN 156, a plug-in card has to be exchanged.
For this operation, theFor this operation, the
For this operation, theFor this operation, the
For this operation, the
unit has to be opened by a qualified technician. CAUTION: unplug the mains plugunit has to be opened by a qualified technician. CAUTION: unplug the mains plug
unit has to be opened by a qualified technician. CAUTION: unplug the mains plugunit has to be opened by a qualified technician. CAUTION: unplug the mains plug
unit has to be opened by a qualified technician. CAUTION: unplug the mains plug
first!first!
first!first!
first!
3 To erase the DMX address of a selected fixture.
4 Selecting a name with a left mouse click, you can overwrite this name, using the keyboard, and set a new name for
the respective Fixture; confirm the new name with ENTER. This name will be displayed in the FIXTURE SHEET
window.
5 With a right mouse click you can invert PAN or TILT on the respective fixture. An inverted function will be indicated
by an INV in the cell.
2.4 Selecting DMX Addresses for Fixtures