Specifications

2121
2121
21
Phone: [phone] Fax: -29
.
Hotline: [phone]Hotline: [phone]
Hotline: [phone]Hotline: [phone]
Hotline: [phone]
.
Users Manual grandMA Version 3.0
RECOMMENDATIONRECOMMENDATION
RECOMMENDATIONRECOMMENDATION
RECOMMENDATION
After changes in the FIXTURES SCHEDULE Menu  especially the deleting of Fixtures from the Show - a RESET of the
grandMA should be executed, for safety reasons, after leaving this menu (point 14) (Control-Alternate-Delete).
This will set up and sort the internal structure again.
4 If the MANUFACTURER LIBRARY button (dark background) is pressed, all Fixtures stored in the library are available.
5 If the USER LIBRARY button (dark background) is pressed, all self-created Fixtures stored in the library are available.
6 If the ACTUAL SHOW button (dark background) is pressed, only Fixtures to be used in this show are available.
7 Will add a new line above the marked position.
8 Will erase the marked line.
9 Accessing the EDIT FIXTURES menu.
In this menu, the selected Fixture can be changed. If NEW ENTRY is activated, a new Fixture can be defined.
àà
àà
à
2.12.1
2.12.1
2.1
1 1
1 1
1 EDITING FIXTURES (modify) and
2.12 2.12
2.12 2.12
2.12 EDITING FIXTURES (create new)
If in the Start column the number of a Fixture is followed by an asterix, this is a Fixture that was modified
or selfmade.
10 Shifting between the Fixture library on the hard disk or floppy disk.
àà
àà
à
2.12.1
2.12.1
2.1
1 1
1 1
1 EDITING FIXTURES (modify)
After switching to Floppy disk, it may take a few seconds for the Floppy to react.
HARDDISK LIBRARY: Uses Fixtures from internal hard disk.
FLOPPY DISK: Uses Fixtures from floppy disk.
11 Calling up the MANAGE menu.
By clicking on the Fixtures/Dimmers in this menu and selecting and pressing the DELETE ENTRY button, you can
delete the self-created Fixtures and Dimmers stored in the library. Fixtures in the manufacturer library can not be
deleted.
12 With UPDATE LIBRARY, you can save newly created or modified Fixtures to the hard disk drive (library) or to a floppy
disk. By that, a new or modified Fixture will be available for a new show. When Fixtures are modified and stored, they
are registered with the appropriate date.
To store a Fixture, please change its name as otherwise this Fixture will appear twice in the library and can
only be discerned by its date.
13 All settings will be stored with the SAVE button.
14 To leave this menu, bringing you back to SETUP.
The next step will be the patching of fixtures.
àà
àà
à
2.4 2.4
2.4 2.4
2.4 Selecting DMX addresses for Fixtures
2.2 Selecting Type and Numbers of Fixtures
If you exchange existing fixtures (same ID-number), all presets and cues of previous fixtures will not be
deleted and can still be used for newly assigned fixtures. The names and DMX values for presets will be taken
over. If necessary, you might have to check and correct the presets.