Specifications

197197

197

Phone: +49 931 49794- 0 Fax: -29

Hotline: +49 5251 688865-99Hotline: +49 5251 688865-99

Hotline: +49 5251 688865-99

Users Manual grandMA Version 3.0

14 True Tracking Backup and Playback on grandMA consoles

Playback Tacking SetupPlayback Tacking Setup

Playback Tacking Setup

5 On the right side of Status indicates, if this console operates in a Playback connection as the Master or the Slave. If

OFF is indicated, the console is working in Stand-Alone mode.

You can either set up or cancel a Playback Tracking MASTER-SLAVE connection using the CONNECT/DISCONNECT

button. See following pages.

Switching the function of the button by short push:Switching the function of the button by short push:

Switching the function of the button by short push:

ALLOW REMOTE LOGIN: This console can be used by another console for a Playback connection.

REJECT REMOTE LOGIN: This console can

notnot

not be used by another console for a Playback connection.

6 In a Playback connection this chart will show the two connected consoles.

7 In the cell on the right side of Timeout for Connection, you find a time indication, after which the consoles will be

switched to Stand-Alone mode, in case the connection between Master and Slave is lost. By clicking into the cell,

you can enter a different time or None.

If an error in the network or on one of the consoles is detected, the NETWORK ERROR window will open (Playback

Socket).

In this window, you see the time frame in which the console will automatically switch to Stand-Alone mode. After

the given time has elapsed, the console/s will switch to Stand-Alone mode that still has to be confirmed by pressing

the OK button. By changing the time to 0, you can switch to Stand-Alone mode much faster.

By pressing the Terminate Connection button, you can switch this console to Stand-Alone mode and work with it

immediately.

8 Will close the window.