Specifications

189189
189189
189
Phone: +49 931 49794- 0 Fax: -29
.
Hotline: +49 5251 688865-99Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
.
Users Manual grandMA Version 3.0
13 Layout and Controls grandMA replay unit
13.3.16 Output Listings and Cuelist Protocols13.3.16 Output Listings and Cuelist Protocols
13.3.16 Output Listings and Cuelist Protocols13.3.16 Output Listings and Cuelist Protocols
13.3.16 Output Listings and Cuelist Protocols
Infading or outfading values of main sequence is marked in different colours in the channel list.
Lists of sequences including names of steps and times.
- Parameter modifications directly in the spreadsheet.
13.3.17 Overwriting a program sequence13.3.17 Overwriting a program sequence
13.3.17 Overwriting a program sequence13.3.17 Overwriting a program sequence
13.3.17 Overwriting a program sequence
Constant access to all effects and channels.
CLEAR and RELEASE functions.
UPDATE function for fast correction of programs.
EDIT function for direct modification of playback parameters.
13.3.18 Adjustment of Hardware13.3.18 Adjustment of Hardware
13.3.18 Adjustment of Hardware13.3.18 Adjustment of Hardware
13.3.18 Adjustment of Hardware
Software Equalizer for Audio Input.
Preselection of certain settings (Defaults).
Free grouping of functions for selective programming.
- Preselection of save mode, times and the standard operation of playback functions.
13.3.19 Connectivity13.3.19 Connectivity
13.3.19 Connectivity13.3.19 Connectivity
13.3.19 Connectivity
4 DMX 512/1990 Output Lines via 5-pin XLR Sockets.
DMX Input with 5-pin XLR Socket and DMX Thru.
Audio Input Line for Mono Audio Signals >20 mV with 6,3mm socket.
SMPTE Timecode Entry for LTC Timecode >200 mV with 6,3mm socket.
MIDI Interface with IN/OUT/THRU.
External control input for direct voltage signals via 25-pin SUB D socket.
2 SVGA Output Lines for one colour monitor and a service monitor via 15-pin sockets.
Parallel printer port Centronic via 25-pin SUB-D socket.
Ethernet Interface for networking (Backup), DMX-transmission and Remote Control with RJ45-socket (10Base-
T) according IEEE 802.4.
2 serial interfaces RS-232C for future extensions (9-pin SUB-D sockets).
Connections for external Keyboard (Mini-D, PS2-Type) and Mouse (Mini-D, PS2-Type).
Power Supply via IEC/CEE 22 Inlet Mains Supply Plug (90  230V autoselecting).
13.3.20 Operating system13.3.20 Operating system
13.3.20 Operating system13.3.20 Operating system
13.3.20 Operating system
Operating system for industrial applications named VXWORKS (no DOS, no WINDOWS).
Fast cold boot time (less than 60 sec).
Software update via download from Internet.
Off-Line Editor available.
13.3.213.3.2
13.3.213.3.2
13.3.2
1 Hardware1 Hardware
1 Hardware1 Hardware
1 Hardware
Pentium Processor with min. 266 MHz Processor Speed and 64 MByte RAM.
12 MByte non-volatile Flash Disk for Operating System, System Software and Installation Data.
Built-in Hard Disk for Show Data, Library, etc..
Integrated 3.5" Floppy Drive for easy software updating and external storage of Show Data.
Reset Buttons on front and rear housing.
Built-in UPS (Un-interruptable Power Supply) to withstand main power failures up to 10 minutes.
Professional protection against electromagnetic interference in compliance with all relevant European EMC
regulations.
13.3.22 Weight and Dimensions13.3.22 Weight and Dimensions
13.3.22 Weight and Dimensions13.3.22 Weight and Dimensions
13.3.22 Weight and Dimensions
- Robust Steel Housing (485 x 430 x 130 mm).
- Weight: 11 kg