Specifications

ManualsBrandsBlack & Decker ManualsFood ProcessorFX1200

181

182

183

184

185

186

187

188

189

190

186186

186

MA Lighting Technology GmbH

Dachdeckerstr. 16

D-97297 Waldbüttelbrunn

www.malighting.de eMail: info@malighting.de

13.2 General Instructions13.2 General Instructions

13.2 General Instructions

13.2.113.2.1

13.2.1

Differences between Replay Unit and the Differences between Replay Unit and the

Differences between Replay Unit and the

grandMAgrandMA

grandMA

or or

grandMAgrandMA

grandMA

light light

light

The Software is identical for all units. But only 1 external monitor can be connected. The UPS Function as well

as the 2048/4096 channels are being fully supported as on the grandMA or grandMA light.

Connectors for external keyboard, mouse and monitor are located on the back of the unit (these are not included

in the delivery volume).

Encoder, Trackerball, Wheel, more than 5 Executor Faders and 5 Executor Buttons as well as quite a few other

buttons on the grandMA and grandMA light are not available with this unit. Nevertheless most of the functions

(except for the executors) can be reached and activated via mouse.

13.2.213.2.2

13.2.2

Working with Mouse, Keyboard and MonitorWorking with Mouse, Keyboard and Monitor

Working with Mouse, Keyboard and Monitor

With these tools almost all functions of the grandMA can be operated on this unit also. The 3 buttons of the

mouse will take on the functions of the buttons on the console. All needed buttons (such as CUE, COPY, NEXT,

a.s.o.) have to be set as Quikeys in advance (

àà

8.2 8.2

8.2 Assigning and Activating QUIKEYS), so that they can be

operated via the mouse. Values within the fixture or channel sheets can be modified with the middle mouse

button. A Command Field will appear on the monitor when clicking on those fields above the (non-existing)

encoders. You can operate this Command Field with the mouse also.

13.2.313.2.3

13.2.3

Working in Stand Alone Mode (Playback)Working in Stand Alone Mode (Playback)

Working in Stand Alone Mode (Playback)

This means working with the Replay Unit without the use of external mouse, keyboard and monitor. In this mode

you can only activate Playback via the existing elements on the front of the unit. Please note, that you will only

have 5 Executor Faders and 5 Executor Buttons available. These Executors correspond with the first 5 Executors

on the grandMA and grandMA light. There is no access to any of the other Executors. This becomes especially

important when programming the show on the grandMA but running the show afterwards with the Replay

Unit.

13.2.413.2.4

13.2.4

Working in True Tracking Backup ModeWorking in True Tracking Backup Mode

Working in True Tracking Backup Mode

The Replay Unit can be run as Slave or as Master in the so-called True Tracking Backup Mode.

àà

1414

14 True

Tracking Backup and Playback on grandMA consoles. In this mode, the Slave can not be accessed directly; this

is being achieved via the Master.

13.2.513.2.5

13.2.5

Working in True Tracking Backup Mode with the Offline Editor as Ma-Working in True Tracking Backup Mode with the Offline Editor as Ma-

Working in True Tracking Backup Mode with the Offline Editor as Ma-

sterster

ster

The Offline Editor can be operated as Master together with the Replay Unit (Slave) in Full Tracking Backup Mode.

This offers special advantages as the Offline Editor can for example show more monitors of the grandMA

àà

1414

True Tracking Backup and Playback on grandMA consoles. In this mode, the Slave can not be accessed directly;

this is being done via the Master (Offline Editor).

13 Layout and Controls grandMA replay unit