Specifications

170170
170170
170
MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
www.malighting.de eMail: [e-mail]
9..3 Command Reference
LEARNLEARN
LEARNLEARN
LEARN
ClassificationClassification
ClassificationClassification
Classification: executing keyword
a) As starting keyword, every executor that follows after LEARN will try to learn a new speed.
LEARN (executor list) ENTERLEARN (executor list) ENTER
LEARN (executor list) ENTERLEARN (executor list) ENTER
LEARN (executor list) ENTER
b)b)
b)b)
b)
In an assign commandIn an assign command
In an assign commandIn an assign command
In an assign command, this function can be put on an executor button (see ASSIGN).
The LEARN function is working with CHASERS ( a sequence assigned to an executor in chaser mode) and with
EFFECTS (regardless if they are assigned to an executor or not).
Note: It makes absolutely no sense to use this function by typing it into the command line. The LEARN function will
calculate the timing between 2 to 4 LEARN commands, average the result, and adapt its speed to that.
LOADLOAD
LOADLOAD
LOAD
ClassificationClassification
ClassificationClassification
Classification: executing keyword
a)a)
a)a)
a)
As starting keywordAs starting keyword
As starting keywordAs starting keyword
As starting keyword, every executor that follows after the LOAD will
go to a given step upon thego to a given step upon the
go to a given step upon thego to a given step upon the
go to a given step upon the
next MANUAL GO command.next MANUAL GO command.
next MANUAL GO command.next MANUAL GO command.
next MANUAL GO command.
LOAD [CUE] [W] [EXEC X] [ENTER]LOAD [CUE] [W] [EXEC X] [ENTER]
LOAD [CUE] [W] [EXEC X] [ENTER]LOAD [CUE] [W] [EXEC X] [ENTER]
LOAD [CUE] [W] [EXEC X] [ENTER]
Giving the keyword CUE is optional.
If W (cue number) is not given, you will be prompted for it.
If executor is not given, default executor will be used.
b)b)
b)b)
b)
In an assign commandIn an assign command
In an assign commandIn an assign command
In an assign command, this function can be put on an executor button (see ASSIGN).
MACROMACRO
MACROMACRO
MACRO
ClassificationClassification
ClassificationClassification
Classification: object keyword
a)a)
a)a)
a)
as starting keyword , given macros will be executed.as starting keyword , given macros will be executed.
as starting keyword , given macros will be executed.as starting keyword , given macros will be executed.
as starting keyword , given macros will be executed.
MACRO (range list) ENTER
Macro numbers in the range list must be in the interval [ 1  999].
b)b)
b)b)
b)
as target for the following commands:as target for the following commands:
as target for the following commands:as target for the following commands:
as target for the following commands:
ASSIGN A macro can be assigned to a VIEWBTN
COPY Copy one macro to another
DELETE Delete a macro
EDIT Open edit menu for macro
INSERT/MOVE Change visible number of macro
STORE Start to record a macro from live actions. Macro recoring is indicated by a flashing macro
button. Macro recording is stopped with the command STORE MACRO ENTER..
Macros can be timed.Macros can be timed.
Macros can be timed.Macros can be timed.
Macros can be timed.
A timed macro plays back with the same timing as it was recorded.
Non-timed macros execute completely at once.
MIDI_BTNMIDI_BTN
MIDI_BTNMIDI_BTN
MIDI_BTN
ClassificationClassification
ClassificationClassification
Classification: object keyword
A MIDI_BTN (midi button) is a remote function triggert by incoming midi note on/note off signals.
The MIDI_BTN simulates an executor keypress, therefore it is working only in combination with an assigned
executor. MIDI_BTNs can be seen under TOOLS / REMOTE MIDI menu.
Calling a MIDI_BTN manually:
MIDI_BTN X ENTERMIDI_BTN X ENTER
MIDI_BTN X ENTERMIDI_BTN X ENTER
MIDI_BTN X ENTER
Linking a MIDI_BTN to an executor:Linking a MIDI_BTN to an executor:
Linking a MIDI_BTN to an executor:Linking a MIDI_BTN to an executor:
Linking a MIDI_BTN to an executor:
STST
STST
ST
ORE MIDI_BORE MIDI_B
ORE MIDI_BORE MIDI_B
ORE MIDI_B
TN X EXEC/FADEREBUTTTN X EXEC/FADEREBUTT
TN X EXEC/FADEREBUTTTN X EXEC/FADEREBUTT
TN X EXEC/FADEREBUTT
ON1/2/3 YON1/2/3 Y
ON1/2/3 YON1/2/3 Y
ON1/2/3 Y
.Z ENTER.Z ENTER
.Z ENTER.Z ENTER
.Z ENTER
Using EXEC in this command will always link the remote to the middle executor button.
X must be in the range from 1 to 72.