Specifications

157157
157157
157
Phone: [phone] Fax: -29
.
Hotline: [phone]Hotline: [phone]
Hotline: [phone]Hotline: [phone]
Hotline: [phone]
.
Users Manual grandMA Version 3.0
9..3 Command Reference
Examples:
FIXTURE 2 THRU 10 AT ( select CMY colour mixing) FIXTURE 1 ENTER
This command will copy the CMY colour of fixture 1 to fixtures 2 THRU 10.
You can copy patterns: Set fixture 1 to BLUE and fixture 2 to GREEN.
FIXTURE 3 THRU 10 AT (select colour) FIXTURE 1 THRU 2 ENTER
Fixture 3 will be BLUE, 4 is GREEN, 5 is BLUE, 6 is GREEN 
Source and destination devices can overlap:
FIXTURE 1 THRU 10 AT (select all features) FIXTURE 2 THRU 10 + 1 ENTER
This will perform a circular copy, shifting the values from device to device.
If the source objects are SEQU,CUE or PRESET, the operation will be a
FILTERED EXTRACTION TO THE PROGRAMMERFILTERED EXTRACTION TO THE PROGRAMMER
FILTERED EXTRACTION TO THE PROGRAMMERFILTERED EXTRACTION TO THE PROGRAMMER
FILTERED EXTRACTION TO THE PROGRAMMER
All values that exist in the source for the destination devices will be copied if theyAll values that exist in the source for the destination devices will be copied if they
All values that exist in the source for the destination devices will be copied if theyAll values that exist in the source for the destination devices will be copied if they
All values that exist in the source for the destination devices will be copied if they
pass the filter !pass the filter !
pass the filter !pass the filter !
pass the filter !
Examples:
FIXTURE THRU AT (select PAN/TILT) CUE 1 ENTER.
This will bring all PAN/TILT information contained in CUE 1 of the default executor
active into the programmer.
CUE 5 AT (select GOBO) CUE 4 ENTER.
Devices of cue 5 get the gobos of cue 4 (of course only if the gobos were programmed into
cue 4).
CUE 5 AT (select GOBO) CUE THRU 4 ENTER
Devices of cue 5 get the gobos
of the STATUSof the STATUS
of the STATUSof the STATUS
of the STATUS of cue 4 ! This is a big difference to the
last example !!!
b)
As helping keywordAs helping keyword
As helping keywordAs helping keyword
As helping keyword: See COPY MOVE and INSERT.
CHANNELCHANNEL
CHANNELCHANNEL
CHANNEL
ClassificationClassification
ClassificationClassification
Classification: object keyword
a)
as starting keywordas starting keyword
as starting keywordas starting keyword
as starting keyword:
CHANNEL ENTER
CHANNEL becomes the DEFAULT KEYWORD.
CHANNEL (range list) ENTER
Select channels in range list.
CHANNEL (range list) AT  (see AT)
Apply values to channels in range list.
Channel numbers in the range list must be in the interval [ 1  9999].
b)
as target for the following executing commandsas target for the following executing commands
as target for the following executing commandsas target for the following executing commands
as target for the following executing commands:
ON activate dimmer value in programmer.
OFF deactivate dimmer value in programmer and deselect channel.
PAUSE PARK dimmer value of channel.
GO UNPARK dimmer value of channel.
CLEARCLEAR
CLEARCLEAR
CLEAR
ClassificationClassification
ClassificationClassification
Classification: immediate keyword
Progressively performs:
1) If there is a selection -> CLEAR_SELECTION
2) If there is an activation -> CLEAR_ACTIVE
3) If there is stage output from programmer -> CLEAR_ALL
CLEAR_ACTIVECLEAR_ACTIVE
CLEAR_ACTIVECLEAR_ACTIVE
CLEAR_ACTIVE
ClassificationClassification
ClassificationClassification
Classification: immediate keyword
Clears the activation in the programmer without destroying stage output.