Specifications

1515

Phone: +49 931 49794- 0 Fax: -29

Hotline: +49 5251 688865-99Hotline: +49 5251 688865-99

Hotline: +49 5251 688865-99

Users Manual grandMA Version 3.0

Entry window/CalculatorEntry window/Calculator

Entry window/Calculator

In this window, you can enter values or times and recalculate them.

Presets can be called up for the selected Fixtures or Channels.

If in the Executor Sheet or in the EDIT menu, a trigger call or time is selected, you can open this window by pressing

the Encoder on the right side of the Display.

If Fixtures or Channels are selected, this window can be opened by pressing the respective buttons for this function

above the Encoder.

The title bar of this window will display the selected function.

In the upper cell, the current value will be displayed.

Using the touch screen, the number pad or turning the encoder

on the right of the display you can enter a different value or

time, and accept it by pressing the OK button.

Left of the numbers, the following buttons are displayed: H (for

hours), M (for minutes), S (for seconds) and F (for frames).

With these buttons, you can directly enter times, if necessary.

or:or:

or:

If a function is selected, buttons for Clear, Deactivate and the

individual presets are displayed in the lower part. If you press

CLEAR, the values of the selected Fixtures or Channels will be

deleted. If you press DEACTIVATE, the active values of the selected

Fixtures or Channels will be deleted.

If you select a Preset, it will be displayed in the upper bar, and

you can select it pressing the OK button.

Entries can be deleted using the OOPS-button.

SOFT (TOUCH) KeyboardSOFT (TOUCH) Keyboard

SOFT (TOUCH) Keyboard

On the grandMA light and ultra-light, you can call it up by pressing the KEYBOARD button.

In the upper right cell, the entered text will

be displayed.

Using the touch screen, you can select

individual buttons.

Pressing RETURN will accept your entry.

1.7 Layout and Controls