Specifications

143143
143143
143
Phone: [phone] Fax: -29
.
Hotline: [phone]Hotline: [phone]
Hotline: [phone]Hotline: [phone]
Hotline: [phone]
.
Users Manual grandMA Version 3.0
8.28.2
8.28.2
8.2
Assigning and Activating QUIKEYSAssigning and Activating QUIKEYS
Assigning and Activating QUIKEYSAssigning and Activating QUIKEYS
Assigning and Activating QUIKEYS
You can display and call up various operation buttons and functions in the QUIKEY window (Display Softkeys).
Create a QUIKEY window
àà
àà
à
3.13.1
3.13.1
3.1 Creating a Window
Press the EDIT button briefly and click on a button in the QUIKEY window.
or:or:
or:or:
or:
Make a right mouse click on a button. The QUIKEY OPTIONS window will open.
Clicking on one of the functions will assign this one to the button.
This function can be called up any time by clicking on it.
List of functions:List of functions:
List of functions:List of functions:
List of functions:
ALIGN OFF: Switches off the ALIGN function.
ALIGN LEFT: ALIGN button pressed once
ALIGN RIGHT: ALIGN button pressed twice
ALIGN BOTH: ALIGN button pressed three times
ALIGN SYM: ALIGN button pressed four times
CLEAR SELECTION: CLEAR button pressed once
CLEAR ACTIVE: CLEAR button pressed twice
CLEAR RELEASE: CLEAR button pressed three times
VALUES MODE: Switches the FIXTURE and CHANNEL SHEET to the VALUES mode
FADE MODE: Switches the FIXTURE and CHANNEL SHEET to the FADE time mode
DELAY MODE: Switches the FIXTURE and CHANNEL SHEET to the DELAY time mode
ASSIGN: ASSIGN button
EMPTY: Creates an empty button
FLIP: l Head Fixtures:
 Pressing 1x: The head will be turned and the light beam be directed to the same target
position.
 Pressing 2x: The head will be turned again and the beam be directed to the last identical
position. (This is only possible for fixtures that have a PAN value of more than 360°,
otherwise, only 2 positions are possible.)
 Pressing 3x: The head will be turned to the first position.
When using head Fixtures, the FIXTURE SHEET will show a yellow square left of the PAN
value, symbolizing the current head position.
l Mirror Fitxures:
The PAN/TILT value will be inverted, the mirror will be positioned in opposition.
 (minus): Minus key
STORE: STORE button
EDIT: EDIT button
UPDATE: UPDATE button
ESCAPE: ESCAPE button
ENTER: ENTER button
ALL SELECTION: Selects
allall
allall
all FIXTURES and CHANNELS (this can be necessary after using the NEXT/PREV).
ODD SELECTION: Selects all odd FIXTURES and CHANNELS
EVEN SELECTION: Selects all even FIXTURES and CHANNELS
INVERT SELECTION: Allows to invert the selection.
- If fixture/dimmer values are activated, but only part of those fixtures/dimmers are selected,
you can delete the current selection and select the other fixtures/dimmers by pushing the
INVERT SELECTION button and ENTER.
- When selecting a group, you can exchange the current selection for that made by the group
(all prior selections will be deleted, even the ones, which might be in the newly selected
group).
DELETE: Delete button
MOVE: MOVE button
COPY: COPY button
BACKUP: BACKUP button
SETUP: SETUP button
TOOLS: TOOLS button
PREVIOUS: PREV. button
NEXT: NEXT button
TRACKBALL SPEED: Toggles the TRACKBALL between coarse and fine.
ENCODER SPEED: Toggles the ENCODER between coarse and fine; further toggling is achieved by pressing on the
ENCODER.
8.2 Assigning and Activating QUIKEYS