Specifications

116116
116116
116
MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
www.malighting.de eMail: [e-mail]
6.2 Editing Effect Groups
●
Modulator: In this column, you can assign an individual Modulator to each individual Size effect. Using
a Modulator, the effect size can automatically be altered.
To assign a Modulator for this effect, select this cell and shortly press the Encoder on the
right side of the Display. The SELECT MODULATOR window will open, where you can now go
to NEW MODULTOR by turning the Encoder and shortly pressing it to select this option. A
new modulator will now be generated in the lower part of the sheet.
●
Modulator: In this column, the modulators will be discerned by respective numbers.
●
Table: Here, the assigned effect for the modulator will be displayed by its name
(Assignment
àà
àà
à item
TableTable
TableTable
Table, previous page).
●
From: Here, the starting point for the automatic modification is set.
●
To: Here, the end point for the automatic modification is set.
●
Phase: Here, an angle for moving individual modulators can be set.
●
Rate: Display of the set ratio between the speed for this individual Modulator as to
that of the whole Effect Group (Assignment
àà
àà
à item
RateRate
RateRate
Rate, below).
●
Base: You can also set an average value for each Effect using the BASE VALUE option. The set
value will overwrite all previously modified values of this function and by this, will control
all Fixtures/Dimmers evenly. The value can be set to between 0 and 100%.
Before modifying the BASE VALUE, select the Effect first. Press the BASE VALUE button once
(green background). Now, you can set an average value using the Encoder below. Pressing
the Encoder once shortly will automatically set the value to 50% (default value). Pressing
the Encoder a second time, the value will be deleted and set to NONE (no BASE VALUE). If
nono
nono
no
BASE VALUE ist set, the Cue behind or a direct access will take effect. You can also use the
ALIGN function to set this value.
àà
àà
à
3.4.1 3.4.1
3.4.1 3.4.1
3.4.1 ALIGN function
●
Offset: Display of the set Offset for this Effect. By modifying the Offset, the starting points for the
selected Fixtures and Dimmers will change. Default setting is between 0 and 100, i.e. the
first Fixture/Dimmer starts with an offset of 0, the last with a maximum offset of 100%; all
Fixtures/Dimmers in between will be distributed evenly. The maximum limit for Offset
modifications can be set from -100 to +100.
Before modifying the value of a size, select the Effect first. Press the OFFSET button once
(green background). Now, you can set a different Offset using the Encoder below. Pressing
the Encoder once shortly will automatically set the value to 0. You can also use the ALIGN
function to set this value.
àà
àà
à
3.4.1 3.4.1
3.4.1 3.4.1
3.4.1 ALIGN function
●
Rate: Display of the set ratio between the speed for this individual Effect as to that of the whole
Effect Group. Possible settings range between 1:16 and 4:1. At a ratio of 16:1, the rate set
for the Effect Group will be divided by 16. If the setting is 4:1, the rate will be multiplied by
four.
Before modifying the ratios value, select the Effect first. Press the RATE FACTOR button
once (green background). Now, you can set a different ratio using the Encoder below.
Pressing the Encoder once shortly will automatically set the value to 1:1.
●
Grp (Group): Display of the set number, by which the assigned Fixtures or Dimmers will be divided. In the
subdivided groups, the Effect will then fully be executed.
Before modifying the subdivision value, select the Effect first. Press the GROUPS button
once (green background). Now, the subdivision of the Effect can be set using the Encoder
below. Pressing the Encoder once shortly will automatically delete the set value.
●
Wing: The set number will indicate, how often the assigned Fixtures or Dimmers and the Effect will
be mirrored. Possible settings range between 8 and +8.