Specifications

115115
115115
115
Phone: [phone] Fax: -29
.
Hotline: [phone]Hotline: [phone]
Hotline: [phone]Hotline: [phone]
Hotline: [phone]
.
Users Manual grandMA Version 3.0
6.2 Editing Effect Groups
●
Table: Here, the assigned Effect is indicated with its name.
To re-assign an Effect, select the cell. Press the Encoder right of the display once. The SELECT
TABLE window will open, where you can select a different Effect for this function. The left
part of the window displays the selected Effect. If the Effect Group has been started, the
Fixtures and Dimmers will be displayed on the Form.
PWM: Pulse width modulation. The pulse width can be defined as follows: Press the
EFFECT SETUP button once (button has a dark background), press the PULSE
WIDTH button once (button has a green background). Now, the pulse width
can be modified using the Encoder below. The pulse width can be set to between
0 and 100%. Pressing the Encoder once shortly will automatically set the
width to 25, 50, or 75%. You can also use the ALIGN function to set this value.
àà
àà
à
3.4.1 3.4.1
3.4.1 3.4.1
3.4.1 ALIGN function
The values set for the respective Effects will be displayed in the WIDTH column.
Press and holdPress and hold
Press and holdPress and hold
Press and hold the Encoder and turn to the right so that the focus (blue cell
frame with red background) will be moved to the right. When moving the focus
beyond the right border, further columns will be displayed (WIDTH, BASE).
RANDOM: Random fade-ins of individual channels of the selected function. Die number
of channels faded in can be set.
SIN: Sinus function
COS: Co-sinus function
LIN+: Saw tooth ascending
LIN: Saw tooth descending
TRIANGLE: Triangle function
PHASE1/PHASE2/PHASE3: To create rainbow colors by means of the color mixing unit.
Setting one of the PHASES on one channel of the color mxing unit will create
a rainbow color-blending when executing the effect.
By pressing the USER DEFINED button (turns dark gray), self-created two-dimensional forms
can be selected for the PAN/TILT function. If a form is to be created or modified, press the
NEW or EDIT button to open the EDIT FORMS menu.
à à
à à
à
6.66.6
6.66.6
6.6 Creating and saving virtual
forms
Pressing the SELECT button will adopt the function; the window will close discarding any
modifications when pressing CANCEL.
●
Dir (direction): In this column, an arrow indicates in which direction the Effect will be executed. To reverse
the direction, select the cell. Press the Encoder right of the display once.
●
Size: In this column, each Effect is displayed with a separate value. The set value increases or
decreases the size of the selected function. The maximum limit for size modifications can
be set from 200 to +200%.
Before modifying the value of a size, select the Effect first. Press the SIZE button once (green
background). Now, you can set a different size using the Encoder below. Pressing the En-
coder once shortly will automatically set the size to 100. Pressing the Encoder a second
time, the value will increase to 200, and at the third time, it will be reset to 0. You can also
use the ALIGN function to set this value.
àà
àà
à
3.4.1 3.4.1
3.4.1 3.4.1
3.4.1 ALIGN function