Specifications

104104
104104
104
MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
www.malighting.de eMail: [e-mail]
If the GROUP MASTER button is pressed, the Sheet will display all created groups.
Select the group to be assigned. Assigned groups are displayed in red. The DIMMER column will show the
number of Dimmer channels used by the Fixtures and Dimmers.
Changing Group NamesChanging Group Names
Changing Group NamesChanging Group Names
Changing Group Names
By pushing the button Name the name of the group assigned to the executor can be changed by keyboard.
or:or:
or:or:
or:
Push ASSIGNbutton 2x (LED is on).
Push the executor button, where the name of the group should be changed.
A window appears, where you can now enter the new name.
or:or:
or:or:
or:
in Group Pool
àà
àà
à
3.3 3.3
3.3 3.3
3.3 Creating and calling up Fixtures and Dimmer GROUPS
Submaster Options
The Settings button must be pressed (dark background).
If the POSITIVE ENABLE button is pressed, this Group Master is the Master Fader for all dimmer channels of
this group.
If a Group Master is set as INHIBIT Master (If a Group Master is set as INHIBIT Master (
If a Group Master is set as INHIBIT Master (If a Group Master is set as INHIBIT Master (
If a Group Master is set as INHIBIT Master (
NEGATIVE INHIBIT button is pressedNEGATIVE INHIBIT button is pressed
NEGATIVE INHIBIT button is pressedNEGATIVE INHIBIT button is pressed
NEGATIVE INHIBIT button is pressed
) for a) for a
) for a) for a
) for a
group also including Fixtures or dimmer channels from other groups, the INHIBIT Mastergroup also including Fixtures or dimmer channels from other groups, the INHIBIT Master
group also including Fixtures or dimmer channels from other groups, the INHIBIT Mastergroup also including Fixtures or dimmer channels from other groups, the INHIBIT Master
group also including Fixtures or dimmer channels from other groups, the INHIBIT Master
must also be pushed up, to be able to use the overlapping channels. The INHIBIT Mastermust also be pushed up, to be able to use the overlapping channels. The INHIBIT Master
must also be pushed up, to be able to use the overlapping channels. The INHIBIT Mastermust also be pushed up, to be able to use the overlapping channels. The INHIBIT Master
must also be pushed up, to be able to use the overlapping channels. The INHIBIT Master
can also be used as Master Fader for all other Group Masters.can also be used as Master Fader for all other Group Masters.
can also be used as Master Fader for all other Group Masters.can also be used as Master Fader for all other Group Masters.
can also be used as Master Fader for all other Group Masters.
Group OverviewGroup Overview
Group OverviewGroup Overview
Group Overview
Pressing the GROUP button twice will open an overview in the right display showing
all assigned Group Masters. In this overview, every Group Master is displayed with a
separate small window.
The upper button contains the group name. Clicking on this button will open the Page
on which it is saved. The display above the Fader shows HERE.
With the FULL button, you can set the Master to 100%. With the OUT button, you can
set the Master to 0. The yellow status indicator next to the buttons will give you the
currently set value for the respective Fader.
Pressing the ALL FULL button in the title bar will set all group masters to 100%.
Pressing the CLOSE button will close this window.
5.1.55.1.5
5.1.55.1.5
5.1.5
Assigning Group MastersAssigning Group Masters
Assigning Group MastersAssigning Group Masters
Assigning Group Masters
Press the ASSIGN button once (LED is on).
Select a group in the GROUP Pool.
Press an EXECUTOR FADER button, to which the group is to be assigned to.
Or: Or:
Or: Or:
Or: Using the ASSIGN menu:
The Function button must be activated (dark background).
5.1 ASSIGN menu (Assignment to EXECUTOR)