Specifications

102102
102102
102
MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
www.malighting.de eMail: [e-mail]
5.1.45.1.4
5.1.45.1.4
5.1.4
Playback OptionsPlayback Options
Playback OptionsPlayback Options
Playback Options
The Settings button must be pressed (dark background).
5.1 ASSIGN menu (Assignment to EXECUTOR)
If you press the Auto start button (background dark gray), the Sequence or Chaser will be automatically started
when pushing the Master Fader upwards (item 6).
If the Auto stop button is pressed (dark gray background), the sequence or Chaser will automatically be switched
off when pushing the master fader downwards to the lower stop.
If the Auto Fix button is pressed (dark background) and the Sequence or Chaser is started, this Executor will be
locked to that position when switching the Executor pages and will
only be released after switching itonly be released after switching it
only be released after switching itonly be released after switching it
only be released after switching it
offoff
offoff
off. If an Executor is saved at that position on another page, this Executor will appear and can be used again only
after switching the locked Executor off.
If the Swop Protected button is pressed, the Dimmers of this Sequence will not be switched off, when another
Sequence is called up using Swop.
If the TRACKING button is pressed (dark background), the Sequence will be executed in Tracking mode. If the button
is not pressed, the Sequence will be executed in Non Tracking mode.
TRACKING and NON TRACKING refer to all Dimmer values TRACKING and NON TRACKING refer to all Dimmer values
TRACKING and NON TRACKING refer to all Dimmer values TRACKING and NON TRACKING refer to all Dimmer values
TRACKING and NON TRACKING refer to all Dimmer values
onlyonly
onlyonly
only
..
..
.
The
TRACKINGTRACKING
TRACKINGTRACKING
TRACKING mode is intended for
theatre applicationstheatre applications
theatre applicationstheatre applications
theatre applications.
Dimmer channels that were called up in a Cue, remain unchanged for each further Cue, until they are modified or
overwritten by a further Cue (LTP principle). Therefore, you do not have to program them in later steps.
TIPTIP
TIPTIP
TIP Example: At the beginning of a Sequence, Dimmer channels are set to 80 percent. Lets assume that the setting is to
be used for several steps. As long as the channels are not modified, they will remain at 80 percent. When working
with this Sequence, you may recognize, however, that the channel setting should only be at 70 percent. Now, you
only have to change this channel setting
onceonce
onceonce
once; all further Cues will automatically be modified to 70 percent.
The
NON TRACKINGNON TRACKING
NON TRACKINGNON TRACKING
NON TRACKING mode is the Standard SHOW Mode. As opposed to TRACKING (Theatre mode), all dimmer
channels that are
not activated (not red)not activated (not red)
not activated (not red)not activated (not red)
not activated (not red) will be saved with 0% or called up with 0%, respectively.
That means: This is to ensure that in the next step, the unused Dimmer channels will be set to 0 percent.
àà
àà
à
5.45.4
5.45.4
5.4
TRACKING window