Specifications
100100
100100
100
MA Lighting Technology GmbH
.
Dachdeckerstr. 16
.
D-97297 Waldbüttelbrunn
.
www.malighting.de eMail: info@malighting.de
11
11
1
22
22
2
33
33
3
22
22
2
5.1.35.1.3
5.1.35.1.3
5.1.3
Changing Buttons and FadersChanging Buttons and Faders
Changing Buttons and FadersChanging Buttons and Faders
Changing Buttons and Faders
The Settings button must be activated (dark background).
5.1 ASSIGN menu (Assignment to EXECUTOR)
1 When clicking on the FADER symbol button, a selection will appear in which you can assign the respective function
to the Fader by another mouse click.
●
Master: The Fader controls all dimmer values of this Sequence.
●
Swap: With the Fader, the sequence is faded in and
allall
allall
all dimmer values used in this sequence are set to
0
It is only possible to use a SWIt is only possible to use a SW
It is only possible to use a SWIt is only possible to use a SW
It is only possible to use a SW
AP AP
AP AP
AP
oror
oror
or
Master fader Master fader
Master fader Master fader
Master fader
..
..
.
●
FADE: With the Fader, the fade-in time can be set for the FADE function, when using Chasers.
●
Speed: The Chaser speed can be set with the Fader.
●
Xfade: With the Fader, you can fade in to the next step.
●
XF A: If Split Crossfade is active, you can fade out the currently called up Cue when pushing the fader
upwards or downwards (
àà
àà
à
item item
item item
item 5).
If Split Crossfade is
not activenot active
not activenot active
not active, you can fade out to the darkening Dimmer channels of the next
Cue when pushing the fader upwards or downwards.
●
XF B: If Split Crossfade is active, you can use the Fader to fade in the next Cue when pushing the fader
upwards or downwards (
àà
àà
à
item item
item item
item
55
55
5).
If Split Crossfade is
not activenot active
not activenot active
not active, you can fade out to the next Cue and to the brightening Dimmer
channels when pushing the fader upwards or downwards.
●
Empty: Fader has no function.
●
Rate: Using the Fader, you can change all fade and delay times for sequences. if the fader is on a
medium position, all times will be executed in the normal way. Using the RATE 1 button, you can
automatically set the Fader to the medium position.