www.blackanddecker.
A B C D E F 2
G H I J K 3
L 4 M
(Original instructions) FSMH1621 STEAM MOP u Technical data u Steam Mop FSMH1621 Voltage Vac 220-240 Power W 1600 Tank capacity ml 350 Weight kg 3.1 Intended use Your Black & Decker steam mop has been designed for sanitising and cleaning sealed hardwood, sealed laminate, linoleum, vinyl, ceramic tile, stone and marble floors and for refreshing carpets. This appliance is intended for indoor household use only.
ENGLISH (Original instructions) After use u u u u Unplug the appliance and allow to cool before cleaning. When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances. Inspection and repairs u u u u u u Unplug the appliance and allow to cool before performing any maintenance or repairs. Before use, check the appliance for damaged or defective parts.
(Original instructions) Flexible hose and handle For convienient use of all accessories. Variable stem jet nozzle For higher pressure steam bursts, twist to change the spray pattern of the steam burst. Small brush (Blue) For cleaning bathrooms. ENGLISH Attaching the hand held stean cleaner (Fig. C) Holding the back of the steam mop body (9) Push the hand held steam cleaner (5) firmly into the stem mop body (9) until it clicks into place.
ENGLISH (Original instructions) Removing the carpet glider (Fig. F) Caution! Always wear suitable shoes when changing the carpet glider on your steam mop. Do not wear slippers or open toed footwear. u Return the handle (10) to the upright position and turn the steam mop ‘OFF’. u Place the steam mop on the resting mat and wait until it cools down. (approximately five minutes) u Place the front of your shoe onto the carpet glider removal tab (21) and press down firmly.
(Original instructions) select the correct operating mode for your particular cleaning operation. Using AutoselectTM , choose from one of the following applications by pressing the autoselect button (6) until the required setting is selected: u u Wood/Laminate u Stone/Marble Tiles/Vinyl The steam mop will select the correct volume of steam required for your particular cleaning operation. Note: Always check you are using the correct setting before using your steam mop.
ENGLISH (Original instructions) Carpet refreshing u Place a cleaning pad (12) on the floor with the ‘hook & loop’ side facing up. u Raise the steam mop off the resting mat (13) and lightly press it down onto the cleaning pad (12). u Place the carpet glider (14) on the floor. u Lightly press the steam mop down onto the carpet glider (14) until it clicks into place. u Place the steam mop on the resting mat. (13) u Connect the steam mop to the mains. u Press the ON/OFF button (1).
(Original instructions) u u u Wipe your appliance over using a soft damp cloth. For stubborn marks you can use a mild solution of soap and water to dampen your cloth. Inspect the seal (22) on the steam nozzle (4) and hose (23) before each use (fig. G). If the seal is missing or damaged then please contact your nearest authorised repair agent. Do not use the appliance. u ENGLISH Contact your local Black & Decker dealers for range availability.
3
4 15
5
6 17
7
90593715 01/2013
