Operation Manual

6
ENGLISH
(Original instructions)
Features
This tool includes some or all of the following features.
1. On/off switch
2. Bowl release button
3. Charging indicator
4. Dust bowl
5. Dust collector
6. Charger socket
7. Charger
Assembly
Accessories (g. A & B)
These models may be supplied with some of the following
accessories:
u An Integrated brush tool (9) for furniture and stairs.
u An Integrated crevice tool (10) for conned spaces.
The integrated brush tool (Fig. A)
u Flip down the brush tool (9) at the end of the dust collec-
tor.
The integrated crevice tool (Fig. B)
u Extend the crevice tool (10) by pulling the crevice tool (10)
until it locks into position.
u Retract the crevice tool (10) by pressing the area (11) and
pushing the crevice tool (10) back into the dust collector
(5).
Installation
Wall Mounting (g. C)
The product can be attached to a wall to provide a convenient
storage and charging point for the appliance.
When xing to a wall, make sure that the xing method is
suitable for the wall type and is appropriate to the weight of
the appliance.
u Mark the location of the screw holes (within reach of an
electrical outlet for chargeing the vac while it is on the wall
bracket).
u Insert the charger cord into the curved slot in the wall
mount bracket leaving approximately 8-9 inches excess.
u Hang the appliance on the wall by placing the opening
on the base of the vac over the hooks in the wall mount
bracket.
Use
u Before rst use, the battery must be charged for at least 4
hours.
Charging the battery (Fig. D)
u Make sure that the appliance is switched off. The battery
will not be charged with the on/off switch in the on posi-
tion.
u Plug the jack plug of the charger (7) into the charging
socket (6) of the appliance.)
u Plug in the charger. Switch on at the mains. The charging
indicator (3) will be lit.
u Leave the appliance to charge for at least 4 hours.
While charging, the charger may become warm. This is
normal and does not indicate a problem. The appliance can
be left connected to the charger indenitely. The charging
indicator (3) will be lit as long as the appliance is connected to
the plugged-in charger.
Warning! Do not charge the battery at ambient temperatures
below 10 °C or above 40 °C.
Switching on and off (g. E)
u To switch the appliance on, slide the on/off switch (1)
forward to position 1.
u To switch the appliance off, slide the on/off switch (1) back
to position 0.
Rotating the dust collector (g. F)
The nozzle can be rotated for better access in tight spots.
u Press the rotation release catch (12).
u Rotate the nozzle to the left or right until it clicks into
place.
Optimising the suction force
In order to keep the suction force optimised, the lters must be
cleared regularly during use.
Emptying and cleaning the product
Emptying the dust bowl (g. G)
u Press the release latch (13) and pull the dust collector (5)
straight off.
u Empty the contents of the bowl.
u To replace the dust collector, place it back onto the handle
until it “clicks” rmly into position.