User Guide
Drilling In Wood
Holes in wood can be made with the same twist drill bits used for metal or with spade bits.
from the flutes.
Drilling In Metal
Troubleshooting
Problem Possible Cause Possible Solution
outlet.
depressed in desired direction. the left or right.
(If the product repeatedly
causes the circuit fuse to
blow, discontinue use
immediately and have it
serviced at a
service center or
authorized servicer.)
(If the product repeatedly
to trip, discontinue use
immediately and have
it
serviced at a
service center or
authorized servicer.)
switch replaced at
Service Center or
Authorized Servicer.
For assistance with your product, visit our website www.blackanddecker.com for
the location of the service center nearest you or call the help line at
1-800-544-6986.
MAINTENANCE
personnel, always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or
1-800-544-6986.
WARNING:
be hazardous.
SERVICE INFORMATION
All Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the
1-800-544-6986 or visit
www.blackanddecker.com










