User guide

DISPLAY CONTENT MANAGER — Installation and User Guide 99
DCM Console Configuration
Figure 97. DCM Console Environment Settings Dialog
2. Edit any of the information as needed.
• The IP address of the local machine is generally not needed unless there
are multiple NICs in the machine and you need to specify an IP address
other than the one specified during installation.
• To browse for a new material folder on the local machine, click the
Set-
tings...
button next to the Folder: field.
• The Database Server Name and Instance Name were specified during
installation. You may direct the DCM to a different server and/or data-
base instance by changing this information.
3. When finished editing environment settings, click the OK button to close
the dialog.
Configure Default Settings
Default settings can be configured for Material and Playlists. The Material
defaults are applied when new material is added to the DCM. The Playlist
defaults are applied when new playlists are created.
To set Material and Playlist defaults, follow these steps:
1. Select Option>Default Settings... from the Menu bar.
The Default Settings dialog shown in Figure 98 appears.
2. If not already selected, select the Material tab.