User guide

96 DISPLAY CONTENT MANAGER — Installation and User Guide
Section 3 — Getting Started with the DCM
DCM Console Configuration
The DCM Console was configured during the installation process and, usu-
ally, this configuration does not need to be changed. However, if the
network is reconfigured, server names and IP addresses are changed, or,
FTP servers are added or removed from the system, the DCM configuration
may need to be updated to reflect these changes in order for it to continue
functioning properly.
Note Configuring FTP Servers, Environment Settings and Default Settings can be
done from any of the five main functional screens.
Configure FTP Servers
To add, edit or delete an FTP Server in the DCM configuration, follow these
steps:
1. Select Option>FTP Server... from the Menu bar.
The FTP Server list dialog illustrated in Figure 92 appears.
Figure 92. FTP Server List Dialog
2. To delete an FTP Server, select the desired server name and click the
Delete button. To Add or Edit an FTP Server, proceed to Step 4.
The DCM Console FTP server delete confirmation dialog shown in
appears.