User guide

76 DISPLAY CONTENT MANAGER — Installation and User Guide
Section 2 — DCM Software Installation
Figure 66. Installation Complete Dialog
13. Click the Finish button to finish the installation.
14. Proceed to the next section to install the DCM client software on the
Control PC.
Installation of DCM Client on Control PC
The DCM client software is installed on the Control PC after installing the
Digital Signage Database and MEDIAEDGE-DS Feature Expansion on the
MediaEdge SVS4 server(s). Follow the steps outlined in Common Installation
Procedures on page 66 and Partial DCM Installation on Server on page 71 before
proceeding with the DCM client installation on the Control PC.
To install the DCM client software on the Control PC, follow these steps:
Note The installation procedures is identical regardless of Windows operating
system. The screens shown in this procedure are Windows XP screens.
1. Follow the steps in the Common Installation Procedures on page 66 until
the Select Features dialog appears.
2. Select the DCM application only. Make sure the Digital Signage and
MEDIAEDGE-DS Feature Expansion are deselected as shown in
Figure 67.