User guide

DISPLAY CONTENT MANAGER — Installation and User Guide 69
Configurations Using MEDIAEDGE-SVS4
Note A new folder cannot be created from this dialog. If you wish to install the DCM
in a folder other than the default, the folder must be created before opening
the Choose Folder dialog.
6. Click the Next button.
The Select Features Dialog shown in Figure 54 appears.
Figure 54. Select Features Dialog
By default, all DCM features are selected.
Client component installation options are as follows:
Install All DCM Components on MediaEdge Server
If installing the DCM software on the same computer as a MediaEdge SVS4
server, all DCM components should be selected as illustrated in Figure 54.
Proceed to Installation of All DCM Components on MediaEdge Server on
page 80 for instructions for performing this installation.
Install DCM on Separate Control PC
If the DCM client software will be installed on a separate Control PC that is
not hosting the MediaEdge SVS4 server, the client software is installed in
two steps.
1. Install the Digital Signage Database and MEDIAEDGE-DS Feature
Expansion on the MediaEdge Server as illustrated in
Figure 55. See
Partial DCM Installation on Server on page 71