User guide

302 DISPLAY CONTENT MANAGER — Installation and User Guide
Section 8 — Target Screen
2. Do one of the following:
• Click the New client button on the Tool bar.
• Select File>New... >Client... from the Menu bar.
• Right-Click on an existing server or group object in the Target Object
Tree and select New>Client... from the menu or press the [
C] key on the
keyboard (see Figure 392).
Figure 392. Right-Click New Object Menu
The Create a New Client dialog shown in Figure 393 appears:
Figure 393. Create a New Client Dialog
3. Enter the desired name for the new client.
4. Select a group to which to assign the client object, if other than the
group selected in
Step 1.
Note The product type of the selected group must match the product type of the
client being defined. In the example above, this is STB4.
5. Enter the IP address of the client device.
Note There is no lookup or validation of IP addresses in the MediaEdge system.
You must verify the correct IP address for each server and client in the
system.
6. Click the OK button to close the Create a New Client dialog and create
the client object.