User guide

DISPLAY CONTENT MANAGER — Installation and User Guide 269
Schedule Management
Note The exact end time is based on the time scale increment. The end time border
snaps to the nearest increment (up to the end of the one-day schedule) when
the mouse button is released.
Cut, Copy and Paste Playlists and Commands
When building a schedule, it is often desirable to copy an existing playlist
or command to another location in the schedule, or to remove a playlist or
command from its current location and place it elsewhere in the schedule.
The Cut, Copy and Paste operations allow you to do this.
To cut or copy an existing playlist or command and paste it in another loca-
tion in the schedule, do the following:
1. Select the playlist or command to be copied.
2. Do one of the following:
• Click the Copy or Cut button on the Tool bar.
• Select Edit>Copy or Edit>Cut from the Menu bar.
• Press the [
CTRL]+ [C] (Copy) or the [CTRL]+ [X] (Cut) keys on the key-
board.
• Right click on the playlist and select Cut or Copy from the menu or
press the [
T] (Cut) or [C] (Copy) key on the keyboard.
3. Click on the schedule at the position where you wish to place the copied
or cut object.
4. To paste the copied or cut object, do one of the following:
• Click the Paste button on the Tool bar.
• Select Edit>Paste from the Menu bar.
• Press the [
CTRL]+ [V] keys on the keyboard.
• Right click on the schedule and select Paste from the menu or press the
[
P] key on the keyboard.
If there is not sufficient time left in the schedule to accommodate the play-
list the selected channel, it will be truncated to fit.
Note After copying a playlist or command object, multiple copies may be pasted
on the schedule using one of the above paste methods.
Delete a Playlist or Command
To delete a playlist or command from a channel schedule, select the playlist
or command to be deleted and follow these steps: