User guide

266 DISPLAY CONTENT MANAGER — Installation and User Guide
Section 7 — Schedule Screen
5. Press the [ENTER] key to set the new length for the selected playlist.
As shown in Figure 337, the start time of the selected playlist was changed
from 08:25:00 to 08:30:00 and its length was changed to 20 minutes
(00:20:00) from its original 10 minutes (00:10:00).
Figure 337. Playlist Start and Length Adjusted
CAUTION Start time and length adjustments may leave gaps between playlists. These
gaps will result in a black display in the channel for the length of the gap. If
this is not desired, adjust start time and length of adjacent playlists to elimi-
nate the gap.
Alternative Methods
• To change the start time, playlist objects can be dragged and dropped
to a new location in the channel.
Note If a playlist object is dropped in a location that overlaps another playlist, it will
automatically be repositioned at the end of the overlapped playlist.
• To change a playlist length, the top or bottom border of the selected
playlist can be dragged to increase or decrease the length.
Note If a playlist border is dragged to a position that overlaps another playlist, the
border returns to the original location and no change in playlist length is
made.
Repeat a Playlist
Rather than adding a number of unique playlists to a playout channel
schedule, it may often be desirable to repeat a playlist a certain number of
times or repeat as many times as possible until the end of the daily schedule
is reached.