User guide

DISPLAY CONTENT MANAGER — Installation and User Guide 249
Channel Management
Note If the Schedule Display is in the Command Channel view, the Command
Channel List dialog will open to display available Command Channels.
2. Select any channels you wish to open.
3. Click the OK button to open the selected channel(s).
Note If at least one channel is already open, additional channels can also be
opened by right clicking on the column header of an open channel, selecting
Open... from the menu or pressing the [O] key on the keyboard (see
Figure 314) and selecting the desired channel(s) to open from the Channel
List dialog.
Figure 314. Channel Right Click Menu - Open
Note A open channel can be closed by right clicking on the channel column header,
selecting Open... from the menu or pressing the [O] key on the keyboard and
removing the check mark next to the desired channel name in the Channel
List dialog. Exiting the DCM Console application closes all open channels.
Adjust Channel Column Width
By default, the channel columns have a fixed width which is automatically
set based on the number of channels open.
If you want to adjust the width of individual channel columns, do the fol-
lowing:
1. Select View>Channel Width>Variable from the Menu bar (see
Figure 315).