User guide

228 DISPLAY CONTENT MANAGER — Installation and User Guide
Section 6 — Playlist Screen
Adjust Material Start Time and Length
To increase or decrease the length of an asset in the playlist, do the fol-
lowing:
1. Click on a component for which you wish to adjust the length.
All of the components (assets) that exist in the selected region columns
appear in the Components Detail Area as illustrated in Figure 284.
Figure 284. Selected Region Components
The current start time (24-hour clock) and length in Hours:Minutes:Sec-
onds (HH:MM:SS) of each component is listed in the Start and Length col-
umns.
2. In the Start: field of the Component Details area, enter the desired start
time for the selected component or use the Up/Down arrow keys to
increase or decrease the start time.
Note Clock times are in a 24-hour format in which 1:00pm is 13:00, 2:00pm is
14:00, etc. Start times can only be changed if the playlist length is sufficient
to accommodate the asset in a new start time. See Adjust Playlist Length on
page 232 for more information.
3. Press the [ENTER] key to set the new length for the selected component.
4. In the Length: field of the Component Details Area, enter the desired
length for the selected component (see
Figure 285) or use the Up/Down
arrow keys to increase or decrease the length.