User guide

DISPLAY CONTENT MANAGER — Installation and User Guide 101
DCM Console Configuration
Length is a numeric value and is adjusted by entering the desired length
with the keyboard or clicking the arrows to increment or decrement the
selected value. Length is expressed in hours:minutes:seconds
(HH:MM:SS).
Still Image Defaults
These defaults apply to Still Image assets only when they are registered in
the DCM.
Rotation
A still image may be rotated with respect to its current orientation.
Click the list button [V] on the Rotation drop-down to see the list of
choices for that value. Select the desired value from the list of choices.
See Figure 99 for Still Image Rotation choices.
Figure 99. Still Image Rotation Selection
Note 90-deg.(CW) is a clockwise rotation. 90-deg.(CCW) is a counter-clockwise
rotation.
Stretch
A still image may be stretched to fill the dimensions of a particular
viewing area. When stretched, the image may or may not have an
acceptable appearance based on the still image aspect ratio and orien
-
tation and the dimensions of the viewing area.
To change the default stretch setting for a still image, click the list
button [V] on the stretch drop-down and select ON or OFF (see
Figure 100) from the list as desired.
Figure 100. Still Image Stretch Selection
Ticker Defaults
These defaults apply to Ticker assets when they are created in the DCM.