2 3 yy @@ ÀÀ ,, @@yy ÀÀ ,, yy @@ ÀÀ ,, ,, yy @@ ÀÀ @@ ÀÀ ,, yy 45 12 3 ® KC1251 KC1252 KC1261 KC1451 KC1461 KC7251 KC9651 KC9652 KC9661 45
Congratulations! On the purchase of your Black & Decker cordless drill. To ensure the best results from your cordless drill please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual).
Contents Page 4 Safety instructions Additional drill and charger safety instructions Page 5 Electrical safety Mains plug replacement Page 6 Fuse replacement Extension cables Unwanted tools and the environment The Black & Decker guarantee After sales service for your Black & Decker product The after sales service policy Accessories Extra batteries Page 7 Technical data Features Variable speed Brake Gear ratio selector Torque adjustment collar Page 8 Fast charger and detachable battery pack Charging
Cordless drills user manual SAFETY INSTRUCTIONS Warning! When using electric tools, the following basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Read all these instructions before attempting to operate this product and save these instructions. For safe operation: • We recommend that you take appropriate measures for the protection of hearing if the sound pressure of 85 dB (A) is exceeded. • Keep the work area clean.
ENGLISH • Never attempt to connect two chargers together. • Always disconnect the supply before making or breaking connections to the battery. • Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet. Keep the switch control lever in the “Off” position when the tool is not in use or when changing accessories. • When drilling or driving screws into walls, floors etc., check wherever “live” electrical wires may be encountered.
ENGLISH For replacement or detachable fuse covers, contact a Black & Decker authorised repair agent. Warning! Never connect live or neutral wires to the earth pin marked E or . • Repairs have not been attempted by anyone other than our authorised repair distributors. This guarantee is offered as an extra benefit and is additional to the customers statutory rights.
ENGLISH TECHNICAL DATA The level of sound pressure of the tool is in accordance with EEC legislation. It is recommended that you take appropriate measures for the protection of your hearing if the sound level seems uncomfortable. This normally equates to a sound pressure in excess of 85dB (A). Note: This user manual also covers catalogue numbers ending with a letter suffix. Refer to your carton for details of your product.
ENGLISH 4 123 5 The torque adjustment collar has 5 positions and provides adjustment of the torque necessary to seat screws of a given size in a particular material. Proceed as follows: Set the torque adjustment collar to position ‘1’. Fit and tighten the first screw. If the clutch of your drill starts to slip before the screw is correctly seated, rotate the torque adjustment collar, as necessary, until the clutch slips when the head of the screw is flush with the surface of the material.
ENGLISH CHANGING THE CHUCK Make sure the forward/reverse switch is set to the centre (lock-off) position. To remove the chuck, open the jaws, hold it firmly in one hand and with a screwdriver held in the other hand, turn the set-screw in the chuck clockwise approximately one turn, to loosen it. Place an allen key in the chuck and tighten the jaws. Give the allen key a short powerful blow in an anti-clockwise direction with a hammer to loosen the chuck on the spindle. Remove the allen key.
Australia Black & Decker (A’asia) Pty Ltd 286-288 Maroondah Highway North Croydon, Victoria 3136 Tel: 03 9213 8200 Fax: 03 9726 7150 New Zealand Black & Decker 483 Great South Road Penrose, Auckland Tel: 09 579 7600 Fax: 09 579 8200 South Africa Black & Decker South Africa (Pty) Ltd Suite no 107, PostNet X65 Halfway House 1685 Tel: 011 314 4431 Fax: 011 314 4435 United Kingdom Black & Decker 210 Bath Road, Slough Berkshire SL1 3YD Tel: 01753 574277 Tlx: 848317 BAND MH Fax: 01753 551155 5/98.
Data protection act: Tick this box if you prefer not to receive information from Black & Decker or other companies.
GUARANTEE CARD South Africa: Black & Decker South Africa (Pty) Ltd, Suite no 107, PostNet X65, Halfway House 1685 United Kingdom & Ireland: PO Box 821, Slough, Berkshire, SL1 3AR Please complete this section immediately after the purchase of your cordless drill and post it to the Black & Decker address in your country (above). If you live in Australia or New Zealand, please register your purchase by using the alternative guarantee card supplied. 5/98.
