® CD18QC 18V CORDLESS DRILL
B A 4 5 3 2 1 C 6 8 7 D E FF G H I 5 5
ENGLISH CD18QC 18V CORDLESS DRILL TECHNICAL DATA Cordless Drill/ Driver Voltage No Load Speed Max. Torque Drilling Capacity – Wood/Steel – Chunck Capacity Weight Battery Voltage Capacity Weight Charger Approx. Charging Time Weight V rpm Nm CD18QC 18 0-850 13 mm mm kg 25/10 10 1.08 V Ah g 18 1.2 825 Hour kg 3 0.2 INTENDED USE Your Black & Decker cordless drill/driver has been designed for all drlling & screw driving applications. GENERAL SAFETY RULES Warning! Read all instructions.
ENGLISH c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools.
ENGLISH • • • Do not expose the charger to water. Do not open the charger. Do not probe the charger. LABELS ON THE CHARGER The following symbols are found on your charger: Your charging base is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. The charging base is intended for indoor use only.
ENGLISH 9. Use only the supplied charger when charging your drill. The use of any other charger could damage the drill or create a hazardous condition. 10. Use only one charger when charging. 11. Do not attempt to open the charger or the drill. There are no customer serviceable parts inside. Return to any authorized Black & Decker service center. 12. DO NOT incinerate the drill or battery packs even if they are severely damaged or completely worn out. The batteries can explode in a fire. 13.
ENGLISH as a lock off button. To select forward rotation, release the trigger switch and depress the forward/reverse control button.To select reverse, depress the forward/reverse control button in the opposite direction. The center position of the control button locks the tool in the off position. When changing the position of the control button, be sure the trigger is released. insert a screwdriver bit into the Quick Connect hex shaft, push the bit in until you hear it click into place. 2.
ENGLISH Drilling in Masonry Use carbide tipped masonry bits. Refer to Drilling section. Keep even force on the drill but not so much that you crack the brittle material. Asmooth, even flow of dust indicates the proper drilling rate. MAINTENANCE Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
