® KC9072 KC9038 KC9019 1
Congratulations! On the purchase of your Black & Decker cordless screwdriver. To ensure the best results from your cordless screwdriver please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual).
Contents Page 4 Safety instructions Additional screwdriver and charger safety instructions Page 5 Double insulation Electrical safety Mains plug replacement Extension Cables Unwanted tools and the environment The Black & Decker guarantee After sales service for your Black & Decker product Page 6 The after sales service policy Accessories Technical data Features Charging your cordless screwdriver Mounting the charger base Page 7 Operating your screwdriver Automatic spindle lock Adjustable clutch Page
Cordless screwdriver user manual SAFETY INSTRUCTIONS Warning! When using electric tools, the following basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Read all these instructions before attempting to operate this product and save these instructions. For safe operation: • We recommend that you take appropriate measures for the protection of hearing if the sound pressure of 85 dB (A) is exceeded. • Keep the work area clean.
ENGLISH • • • • • • • • when changing accessories, ensure that the selector is in the central position. When driving screws into walls, floors etc., check where “live”electrical wires may be encountered. Do not touch any front metal parts of your screwdriver! Hold it only by the plastic housing. Do not store your screwdriver in locations where the temperature may reach or exceed 50°C/120°F (such as outside sheds or metal buildings in summer).
ENGLISH THE AFTER SALES SERVICE POLICY (UK, AUSTRALIA AND NEW ZEALAND ONLY) It is our aim that all Black & Decker customers should be totally satisfied with their Black & Decker product and after sales service, but if help or advice is needed please contact the local Black & Decker service agent who will be happy to help. Full details of our after sales service can be obtained from any of our Black & Decker service agents. ACCESSORIES The performance of any power tool is dependant upon the accessory used.
ENGLISH The charger base is symmetrical and you can mount it either way up. Insert a pencil through one of the two mounting holes to mark its position. Take the charger base away from the wall. Drill a 5.0mm hole in the wall in the desired position. Insert a plastic wall plug in the hole and gently tap it with a hammer to seat it flush with the wall. Position the charger base over the wall plug and fit one of the wood screws. Mark the position of the second hole and remove the charger base.
ENGLISH Screw size Pilot hole diameter Softwood Hardwood No.6 (3.5mm) 2.0mm No.8 (4.0mm) 3.2mm No.10 (5.0mm) 3.5mm 2.5mm 3.5mm 4.0mm Clearance hole Hardwood 4.0mm 5.0mm 5.7mm HANDY HINTS • Be careful to avoid over tightening small brass screws. The heads are easily twisted off and the threads can strip. Hand tightening of these screws is recommended. • Use Posidriv screws whenever possible; they are easier to drive because the screwdriver bit engages more firmly in the screwhead.
Australia Black & Decker (A’asia) Pty Ltd 286-288 Maroondah Highway North Croydon, Victoria 3136 Tel: 03 9213 8200 Fax: 03 9726 7150 New Zealand Black & Decker 483 Great South Road, Penrose, Auckland Tel: 09 579 7600 Fax: 09 579 8200 South Africa Powerdek Tool Distributors 22 Inglestone Road, Village Deep Johannesburg, South Africa Tel: 011 493 4000 Fax: 011 493 6391 United Kingdom Black & Decker 210 Bath Road Slough Berkshire SL1 3YD Tel: Tel: Tlx: Fax: 10Part no: ??????-?? 9/96.
Data protection act: Tick this box if you prefer not to receive information from Black & Decker or other companies.
GUARANTEE CARD Australia: Call 1900 937766 (the maximum call charge is $2.00 excluding tax) New Zealand: Call 0900 97766 (the maximum call charge is $2.00 excluding tax) South Africa: After sales service, PO Box 5303, Johannesburg 2000 United Kingdom & Ireland: PO Box 821, Slough, Berkshire, SL1 3AR Please cut out this section, put into a stamped addressed envelope and post immediately after the purchase of your screwdriver to the Black & Decker address in your country (above).
