CD701 1
Copyright Black & Decker 2
2 3 1 4 A B 3
1 C D 4 E 4
ENGLISH HEATGUN CD701 CONGRATULATIONS! You have chosen a Black & Decker tool. Our aim is to provide quality tools at an affordable price. We hope that you will enjoy using this tool for many years. EC DECLARATION OF CONFORMITY CD701 Black & Decker declares that these products conform to: 98/37/EC, 89/336/EEC, 73/23/EEC, EN 55014, EN 60335, EN 61000 LpA (sound pressure) dB(A) 68 LWA (acoustic power) dB(A) 81 Always wear ear protection if the sound pressure exceeds 85 dB(A).
ENGLISH General 1. Keep work area clean Cluttered areas and benches can cause accidents. 2. Consider work area environment Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the work area well lit. Do not use the tool where there is a risk of causing fire or explosion, e.g. in the presence of flammable liquids and gases. 3. Keep children away Do not allow children, visitors or animals to come near the work area or to touch the tool or mains cable. 4.
ENGLISH Keep handles and switches dry, clean and free from oil and grease. 20. Repairs This tool complies with relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user. Additional safety instructions for heatguns General ◆ Do not place your hand over the air vents or block the vents in any way. ◆ The nozzle of this tool becomes extremely hot during use. Let it cool down before touching.
ENGLISH Mains plug replacement (U.K. & Ireland only) Using an extension cable Always use an approved 3-core extension cable suitable for the power input of this tool (see technical data). When using a cable reel, always unwind the cable completely. PACKAGE CONTENTS The package contains: 1 Heatgun 1 Instruction manual ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Should your mains plug need replacing and you are competent to do this, proceed as instructed below.
ENGLISH Do not direct the heat to points near glass as the heat could crack the glass. Stationary use (fig. D) This tool can also be used in stationary mode. ◆ Place the tool onto a firm and stable surface as shown. ◆ Make sure that the nozzle points away from you. ◆ Secure the cable to prevent pulling the tool off the working surface. Be careful not to drop anything into the nozzle. Do not touch the nozzle.
ENGLISH OTHER DIY TOOLS Black & Decker has a full range of tools that make DIY jobs easy. If you would like further information on the following products, please contact our Service and Information Centre (see the address page towards the end of this manual) or your local Black & Decker retailer.
ENGLISH 11
ENGLISH 12
Australia DEWALT Industrial Power Tool Company 7 Clarice Road Box Hill, Victoria 3128 Tel. 03 9895 9200 Fax 03 9899 7465 New Zealand Black & Decker 81 Hugo Johnson Drive Penrose, Auckland, New Zealand Tel. 09 579 7600 Fax 09 579 8200 South Africa Black & Decker South Africa (Pty) Ltd Physical address: 39 Commerce Crescent Eastgate, ext. 12, Sandton, Kramerville 2148 Postal address: Postnet Suite 107, Private Bag X65 Halfway House 1685 Tel.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Yes No Was this tool your first purchase? Yes No Was this tool a gift? Postal code: ............................................................................................. Town: ....................................................................................................... Address: ...................................................................................................
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ GUARANTEE CARD ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ✁ Please complete this section immediately after the purchase of your tool and send it to Black & Decker in your country. If you live in Australia or New Zealand, please register by using the alternative guarantee card supplied.
