www.blackanddecker.co.
9 9 9 9 8 8 4 4 5 6 7 A 7 B 13 11 5 10 11 13 12 10 5 C 2 D 5 10 11 13
13 16 14 13 15 11 10 5 E F 3
Intended use Your Black & Decker angle grinder has been designed for cutting metal and masonry using the appropriate type of cutting or grinding disc.This tool is intended for consumer use only. Safety instructions ◆ ◆ ◆ ◆ Warning! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. Read all of this manual carefully before operating the tool.
Electrical safety This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. ◆ ◆ Additional safety instructions for Australia and New Zealand ◆ This appliance is not intended for use by young or infirm persons without supervision. Children must be supervised to ensure they do not play with the appliance.
Fitting the side handle ◆ Screw the side handle (2) into one of the mounting holes in the tool. Warning! Always use the side handle. Fitting and removing grinding or cutting discs (fig. C - E) Always use the correct type of disc for your application. Always use discs with the correct diameter and bore size (see technical data). Removing ◆ Keep the spindle lock (3) depressed and loosen the outer flange (13) using the two-pin spanner (14) (fig. E).
Protecting the environment EC declaration of conformity Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. Separate collection of used products and packaging allows materials to be recycled and used again.
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker 81 Hugo Johnston Drive Penrose, Auckland, New Zealand United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 581069-00 8 Tel. 09 579 7600 Fax 09 579 8200 Tel.
