INSTRUCTION MANUAL THERMOPLASTIC SUBMERSIBLE WATER PUMP BXWP61603 BXWP61203 BXWP61303 Customer Support (855-222-3033) customer.service@pedrollo-usa.com. Please read before returning this product for any reason.
ENGLISH Index Content Page # Components Safety Guidelines 3 Description 4 Specifications 4 Installation 5 Operation 5 Maintenance 6 Troubleshooting 6 Performance 7 Parts 8 Notes 9-10 Warranty 11 1 2 3 5 4 Components 1 Handle 2 1-1/4 in. (31.75mm) NPT Discharge 3 Motor 4 Base 5 3/4 in. (19.
ENGLISH Safety Guidelines Carefully read, understand and follow all safety instructions in this manual. Retain this manual for future reference. WARNING: Don’t expose the pump to freezing temperatures. Discharge lines exposed to freezing temperatures should be positioned with a downward slope to prevent freezing. This is the safety alert symbol. When you see this symbol, look for one of the following signal words.
ENGLISH Description This non-automatic submersible water pump is designed to remove water from flooded basements, window wells, stock tanks, etc. The permanent split capacitor motor is oil cooled and hermetically sealed for cooler operation. The pump comes equipped with a 3-prong grounding type power cord.
ENGLISH Installation Operation WARNING: Always disconnect the power source before attempting to install, service or perform maintenance on the pump. Failure to do so may result in fatal electrical shock. Always disconnect the power source before servicing pump. 1. Connect the power cord to a 115 volt AC grounded GFCI receptacle. NOTICE: Your pump is designed and built to give you reliable performance and long life. It will pump water for years when properly installed in the right environment.
ENGLISH Maintenance WARNING: Risk of electric shock. Always disconnect the power supply before attempting to install, service or perform maintenance on the pump. WARNING: All repairs must be made by a qualified technician. CAUTION: This submersible pump contains oil which may become pressurized and hot under normal operating conditions – allow the pump to cool for 2-3 hours before servicing. 1. The pump motor is hermetically sealed in the housing and does not require any service.
ENGLISH Performance Height and/or piping restriction will reduce the pump output performance. It is recommended to use the same size or larger pipe as the pump discharge for optimum performance. DISCHARGE HEIGHT ft/m 25ft / 7.62m 20ft / 6.1m Model Number BXWP61603 15ft / 4.6m BXWP61203 BXWP61303 10ft / 3.05m 5ft / 1.52m 0 0 500 gal 1893 L 1000 gal 3785 L 1500 gal 5678 L 2000 gal 7571 L 2500 gal 9464 L GALLONS / LITERS PER HOUR Gallons Per Hour At Discharge Height Model 0 ft. 5 ft. 10 ft.
ENGLISH Replacement Parts For parts, contact customer support at 855-222-3033 or email at customer.service@pedrollo-usa.com.
Notes: ENGLISH 9
ENGLISH Notes: 10
ENGLISH Limited Warranty: General Terms and Conditions - Cont: Manufacturer warrants the products specified in this warranty to be free from defects in material or workmanship for one (1) year from date of purchase. During the time period and subject to the terms and conditions, manufacturer will repair or replace to the original user or consumer any portion of this product which proves to be defective due to materials or workmanship.
Customer Support (855-222-3033) customer.service@pedrollo-usa.com Manufactured Under License By: Pedrollo Group Inc. 45 Maryland Ave East St. Paul, Minnesota 55117 Copyright ©2022 BLACK & DECKER, BLACK+DECKER, the BLACK & DECKER and BLACK+DECKER logos and product names and the orange and black color scheme are trademarks of The Black & Decker Corporation and are used under license. Product may differ from that pictured. Does not affect function.
