INSTRUCTION MANUAL DRILL PUMP DRILL PUMP KIT BXWP60002 BXWP60005 Customer Support (855-222-3033) customer.service@pedrollo-usa.com Please read before returning this product for any reason.
ENGLISH Description Versatile drill powered pump used to transfer non-explosive or non-corrosive liquid from sinks, tanks, water heaters, aquariums, window wells, bathtubs, etc. This pump is designed to work with most power drills rated up to 2800 RPM. A drill with a minimum 1/4” chuck is required. NOTE: DRILL SOLD SEPARATELY. Drill not included with any model. Tubing & Hose included only with model BXWP60005 Safety Guidelines Carefully read, understand and follow all safety instructions in this manual.
ENGLISH Installation and Operation: BXWP60002 and BXWP60005 4. Attach a standard garden hose to outlet port of the pump. If the included garden hose is not being used on the suction port, it may be used for the discharge. WARNING RISK OF ELECTRICAL SHOCK: For corded or battery operated drill follow drill manufacturers instructions. Installation and Operation NOTE: It is recommended to add a few drops of lubricating 5. Be certain that the suction hose/tube is fully submerged into liquid source.
ENGLISH Maintenance 1. 2. 3. Thoroughly flush the pump with clean water after each use. Inspect drive shaft and suction / discharge threads for signs of wear. Inspect all hoses/tubing for signs of wear. Replace if necessary. Troubleshooting Problem Possible Causes How To Correct Air is leaking into the inlet hose or connection. Pump will not prime or move liquid. Pump running but flow rate not sufficient. Liquid is leaking where the shaft enters the drill pump body.
