Blender User Manual
This appliance has a polarized plug (one blade is wider than the other). 
To reduce the risk of electric shock, this plug is intended to fit into a 
polarized outlet only one way. If the plug does not fit fully into the outlet, 
reverse the plug. If it still does not fit, contact a qualified electrician. 
Do not attempt to modify the plug in any way.
a) A short power-supply cord (or detachable power-supply cord) is to be 
provided to reduce the risk resulting from becoming entangled in or 
tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords are 
available and may be used if care is exercised in their use.
c)  If a long detachable power-supply cord or extension cord is used,
  1) The marked electrical rating of the detachable power-supply cord 
    or extension cord should be at least as great as the electrical 
    rating of the appliance,
  2) If the appliance is of the grounded type, the extension cord should  
    be a grounding-type 3-wire cord, and
  3) The longer cord should be arranged so that it will not drape over 
    the countertop or tabletop where it can be pulled on by children  
    or tripped over.
 If the power supply cord is damaged, it should be replaced by 
qualified personnel or in Latin America by an authorized service center.
When using electrical appliances, basic safety precautions should 
always be followed, including the following:
❍ Read all instructions.
❍ To protect against risk of electrical shock do not immerse cord, 
plugs or appliance in water or other liquid.
❍Close supervision is necessary when any appliance is used by or 
near children.
❍Unplug from outlet when not in use, before putting on or taking off 
parts, and before cleaning.
❍Avoid contacting moving parts. 
❍Do not operate any appliance with a damaged cord or plug or 
after the appliance malfunctions, or is dropped or damaged in any 
manner. Return appliance to the nearest authorized service facility 
or call the appropriate toll-free number on the front of this manual 
for examination, repair or electrical or mechanical adjustment. Or, 
call the appropriate toll-free number on the cover of this manual.
❍The use of attachments, including canning jars, not recommended 
by the manufacturer may cause fire, electric shock or injury.
❍Do not use outdoors.
❍Do not let cord hang over edge of table or counter.
❍Keep hands and utensils out of container while blending to reduce 
the risk of severe injury to persons or damage to the blender. A 
scraper may be used, but must be used only when the blender is 
not running.
❍Blades are sharp. Handle carefully.
❍To reduce the risk of injury, never place cutter-assembly blades on 
base without jar properly attached.
❍Always operate blender with cover in place.
❍When blending hot liquids, remove center piece of two-piece cover.
This product is for household use only.
1.  Before first use, wash all parts except the unit base. Put-the gasket on 
top of the blade assembly.
2. 
Place the blade assembly into the jar base and turn 
the jar base clockwise until tight .
3. 
 Place the assembled jar onto the 
unit base and turn toward lock ( ) until secured in 
place. You’ve engaged the interlock system if you lift 
the jar handle and the entire blender lifts together as 
one unit.
1.  Be sure the unit is “OFF” and plug the cord into a standard electrical 
outlet.
2.  Place the food to be blended into the jar and the lid on the jar before 
blending.
3.  Be sure that the lid cap is in place. When crushing ice or hard foods, 
keep one hand on the lid.
4. Choose the speed that best suits 
your task for food or beverage 
blending . Press the LOW/HI 
button in combination with the task 
button when choosing or switching 
speeds. 
5. Use the Pulse (P) button for a few 
seconds, then release for quick or 
delicate blending tasks. Releasing 
the pulse automatically turns the 
blender off. 
6.  If you want to add ingredients while the blender is on, remove the lid 
cap and drop ingredients through the lid opening.
7.  When finished blending, push the Off/Pulse (O/P) button.
8.  To remove the jar, grasp the handle, twist toward the unlock ( ) and 
lift it from the unit base. Remove the lid before pouring.
•  Cut food into small pieces about ¾” (2 cm) before adding to the blender.
•  When ingredients stick or spatter along the sides of the jar, stop the 
blending action and remove the lid. Use a rubber spatula to push food 
toward the blades. Replace the lid, then continue blending.
•  Some of the tasks that cannot be performed efficiently with a blender 
are: beating egg whites, whipping cream, mashing potatoes, grinding 
meats, mixing dough, and extracting juices from fruits and vegetables.
•  The following items should never be placed in the unit as they may 
cause damage: dried spices and herbs (ground alone), bones, large 
pieces of solidly frozen foods, tough foods such as turnips.
This product contains no user serviceable parts. Refer service to qualified 
service personnel.
1.  The "Fast Clean" feature helps make it easier to clean the blender jar 
by loosening food particles. You may use the "Fast Clean" feature by 
filling the jar half full with lukewarm water. Add a little dish detergent 
for tough cleaning jobs (such as after making salsa, shakes, or salad 
dressing). Hold the lid and press any button. Let the unit run for about 
5 seconds, then press Off.
2.  Unplug the unit, twist to unlock ( ), lift the jar off the unit base,  
and rinse.
3.  Parts may be hand-washed. Follow the cleaning instructions below. 
1.  Before cleaning, turn off and unplug the blender.
2.  Rinse parts immediately after blending for easier cleanup.
3.  Wipe the unit base with a damp cloth and dry thoroughly. Remove 
stubborn spots by rubbing with a damp cloth and non-abrasive cleaner. 
4.  Removable parts can be washed by hand or in a dishwasher. Do not 
place jars or parts in boiling liquids.
5.  If liquids spill into the base, wipe with a damp cloth and dry thoroughly. 
Do not use rough scouring pads or cleansers on parts  
or finish.
is a registered trademark of The Black & Decker Corporation, 
Towson, Maryland, USA
For service, repair or any questions regarding your appliance, call the 
appropriate 800 number on cover of this book. Please  return the 
product to the place of purchase. Also, please  mail product back to 
manufacturer, nor bring it to a service center. You may also want to consult 
the website listed on the cover of this manual.
•  Any defect in material or workmanship provided; however, Applica’s 
liability will not exceed the purchase price of product.
• Two year(s) from the date of original purchase with proof of such 
purchase.
•  Provide you with a reasonably similar replacement product that is either 
new or factory refurbished.
•  Save your receipt as proof of date of sale.
•  Visit the online service website at www.prodprotect.com/applica, or call 
toll-free 
1-800-231-9786, for general warranty service.
•  If you need parts or accessories, please call 1-800-738-0245.
•  Damage from commercial use
•  Damage from misuse, abuse or neglect
•  Products that have been modied in any way
•  Products used or serviced outside the country of purchase
•  Glass parts and other accessory items that are packed with the unit
•  Shipping and handling costs associated with the replacement of the unit
•  Consequential or incidental damages (Please note, however, that some 
states do not allow the exclusion or limitation of consequential or 
incidental damages, so this limitation may not apply to you.)
•  This warranty gives you specic legal rights. You may also have other 
rights that vary from state to state or province to province.
Applica Manufacturing, S. de R. L. de C.V. garantiza este producto 
por 2 años a partir de la fecha original de compra.
Esta Garantía cubre cualquier defecto que presenten las piezas, 
componentes y la mano de obra contenidas en este producto.
Para reclamar su Garantía deberá presentar al Centro de Servicio 
Autorizado la póliza sellada por el establecimiento en donde adquirió 
el producto. Si no la tiene, podrá presentar el comprobante de compra 
original.
Llame sin costo al teléfono 01 800 714 2503, para ubicar el Centro de 
Servicio Autorizado más cercano a su domicilio en donde usted podrá 
encontrar partes, componentes, consumibles y accesorios.
Acuda al Centro de Servicio Autorizado con el producto con la póliza de 
Garantía sellada o el comprobante de compra original, ahí se reemplazará 
cualquier pieza o componente defectuoso sin cargo alguno para el usuario 
nal. Esta Garantía incluye los gastos de transportación que se deriven de 
su cumplimiento.
Esta Garantía no será válida cuando el producto:
A) Se hubiese utilizado en condiciones distintas a las normales.
B) No hubiese sido operado de acuerdo con el instructivo de uso que le 
acompaña.
C) Cuando el producto hubiese sido alterado o reparado por personas no 
autorizadas por Applica Manufacturing, S. de R. L. de C.V.
 Usted podra encontrar partes, componentes, consumibles y 
accesorios en los centros de servicios autorizados. Esta garantía incluyen 
los gastos de transportación que se deriven de sus cumplimiento dentro 
de sus red de servicio.
SERVICIO TECNICO CENTRAL 
ATTENDANCE 
Avda. Monroe N° 3351 
Buenos Aires – Argentina 
Fonos: 0810 – 999 - 8999
  011 - 4545 - 4700
  011 – 4545 – 5574
supervision@attendance.com.ar
MASTER SERVICE SERVICENTER 
Nueva Los Leones N° 0252 
Providencia 
Santiago – Chile 
Fono Servicio: (562) – 232 77 22 
servicente@servicenter.cl
PLINARES 
Avenida Quito # 88A-09 
Bogotá, Colombia 
Tel. sin costo 01 800 
7001870
Aplicaciones Electromecanicas, S.A. 
Calle 26 Bis y Ave. 3 
San Jose, Costa Rica 
Tel.: (506) 257-5716 / 223-0136
Servicio Master de Ecuador 
Av. 6 de Diciembre 9276 y los Alamos 
Tel. (593) 2281-3882
Calle San Antonio Abad 2936 
San Salvador, El Salvador 
Tel. (503) 2284-8374
MacPartes SA 
3ª Calle 414 Zona 9 
Frente a Tecun 
Tel. (502) 2331-5020 / 2332-2101
ServiTotal 
Contigua a Telecentro 
Tegucigalpa, Honduras, 
Tel. (504) 235-6271
Articulo 123 # 95 Local 109 y 112 
Col. Centro, Cuauhtemoc, 
México, D.F. 
Tel. 01 800 714 2503
ServiTotal 
De semáforo de portezuelo 
500 metros al sur. 
Managua, Nicaragua, 
Tel. (505) 248-7001
Servicios Técnicos CAPRI 
Tumbamuerto Boulevard 
El Dorado Panamá 
500 metros al sur. 
Tel. 3020-480-800 sin costo 
(507) 2360-236 / 159
Servicio Central Fast Service 
Av. Angamos Este 2431 
San Borja, Lima Perú 
Tel. (511) 2251 388
Buckeye Service 
Jesús P. Piñero #1013 
Puerto Nuevo, SJ PR 00920 
Tel.: (787) 782-6175
Plaza Lama, S.A. 
Av, Duarte #94 
Santo Domingo, 
República Dominicana 
Tel.: (809) 687-9171
Inversiones BDR CA 
Av. Casanova C.C. 
City Market Nivel Plaza Local 153 
Diagonal Hotel Melia, 
Caracas. 
Tel. (582) 324-0969
www.applicaservice.com 
servicio@applicamail.com
Por favor llame al número correspondiente que aparece en la lista a continuación 
para solicitar que se haga efectiva la garantía y donde Ud. puede solicitar 
servicio, reparaciones o partes en el país donde el producto fué comprado. 
También puede consultarnos en el e-mail servicio@applicamail com.mx
es una marca registrada de The Black & Decker Corporation, 
Towson, Maryland, E.U.
Made in People’s Republic of China
Printed in People’s Republic of China
 
 


