SDS
8.2. Enaineerina
controls
Engineering control measures
SAFETY
DATA
SHEET
Difluoromethane
&
Pentafluoroethane
Provide adequate ventilation.
Paae:
4/10
Revision
nr
: 1
Issue
date
: 30104/2018
Supersedes
:
。
rganisational
measures to preventllimit releases, dispersion and exposure
Safe handling: see section 7 .
Environmental exposure controls
8.3. Personal orotective
eauioment
IPPEl
Personal protection equipment
Respiratory protecti
on
Hand protection
Eye
protection
Body protection
Thermal hazard protection
00
not allow contact with
sOi
l, surface or ground water
Comply with applicable Community environmental protection legislation
The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific
workplace
In
case of insufficient ventilation, wear suitable respiratory equipmen
t.
cold insulating gloves
Use suitable eye protection.
Wear suitable protective clothing
cold insulating gloves
|
SECTION
: 9.
Physical
and
chemical
prope
此
ies
9.1
.1
nfo
rmation
on
basic ohvsical and chemical orooerties
Appearance liquid
,Gas
Colour Not applicable
Odour Ether
Odour threshol
d:
No
data available
pH
: 7
Melting pointlfreezing point
No
data availab
le
Initial boiling point and boiling range -48,5 oC
Flash point
No
data available
Evaporation rate
No
data available
Flammability (solid
, gas)
Non
flammable
Upper/lower flammability or explosive limits
No
data available
Vapour pressure
No
data available
Vapour density
No
data available
Relative density
No
data available
Water solubility
No
data available
Solubility
in
different media
No
data availab
le
Partition coefficient n-octanol/water
No
data available
Auto-ignition temperature
> 750
oC
Oecοmposit
ion
temperature
No
data available
Viscosity
No
data available
Explosive properties Not applicable
,The study does not need to
be
conducted because there are
no chemical groups associated with explosive properties present
in
the
molecul
e.
Oxidising properties Not applicable
The classification procedure needs not to
be
applied because there are no
chemical groups present in the molecule which are associated with oxidising
properties.