User Manual

Operating your Fan
7
Always choose a safe location for the fan, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. This appliance requires no
installation, it should be used solely as a portable appliance.
WARNING: Keep all objects at least 1 metre from the front, sides and rear of
the appliance
Place the fan on a dry, level and sturdy surface.
Plug the power cord into the socket ensuring the fan switch is in the off position.
This Fan may be operated by the Manual Controls located on top of the
unit or by the Remote Control.
On/Off: To turn fan on, press the Power button.
The fan will start on high speed.
Speed Control: Press the Fan button repeatedly
to change speed.
Auto-off Timer: This setting will automatically
turn your fan off after 1, 2, 4, or 8 hours.
1 hour: Press one time
2 hours: Press two times
4 hours: Press three times
8 hours: Press four times
Turn Timer off: Press five times or press power
button
To turn off, press the Power button.
To activate Oscillation, press the knob on the back of the motor housing.
To turn off Oscillation, pull the knob back out again.
Remote Control
Install 2 x AAA batteries (not supplied) into the back of the remote control .
All the functions performed with the Remote-Control work identically to the
Manual Controls.
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-
zinc) or rechargeable (nickel- cadmium) batteries.
DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY
EXPLODE OR LEAK.
IMPORTANT! NEVER COVER THIS APPLIANCE!