www.blackanddecker.co.
General Care and Safety Guide Thank you for choosing this Black & Decker product. This appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
General Care and Safety Guide 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. Never place appliance close to radiant heat source. Never operate in areas where petrol, paint or other flammable liquids are used or stored. Never use the appliance to dry clothes. Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance. Never use abrasive cleaning products on this appliance.
Components 1.Front grill 2.Grill protective ring 3.Blade knob 4.Blade 5.Rear grill mounting nut 6.Rear grill 7.Shaft 8.Motor assembly 9.Oscillating pin 10.Remote storage 11.Control panel 12.Inner pole 13.Height adjuster 14.Outer pole 15.Base 16.Base locking mechanism 17.Remote control 18.
Assembly Place the base on a flat surface. Remove the locking mechanism from the pole and insert the pole onto the base. Turn over the base with the pole inserted and secure by turning the locking mechanism clockwise until completed fastened. Place the motor assembly and control panel onto the extension pole and secure by turning the assembly knob clockwise. Remove the rear grill mounting nut by turning it counter-clockwise.
Assembly Fix the front grill and the rear grill with the fastening ring around the grill. You will hear it click into place around the grill. Align the blade onto the shaft and secure it by tightening the blade knob counter-clockwise. Then use a screwdriver to tighten the fastening ring.
Operating your Fan Always choose a safe location for the fan, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. This appliance requires no installation, it should be used solely as a portable appliance. WARNING: the appliance Keep all objects at least 1 metre from the front, sides and rear of Place the fan on a dry, level and sturdy surface. Plug the power cord into the socket ensuring the fan switch is in the off position.
Cleaning The fan requires regular cleaning to ensure trouble free operation. Ensure that the fan is switched off from the supply mains before removing the guard. Unplug the fan from the mains supply before cleaning. Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and dirt. Use a vacuum cleaner to remove dust and fluff from around the grills. Ensure the fan is dry before plugging back into the mains supply. Do not attempt to dismantle the fan. There are no user serviceable parts.
1 Year Warranty Thank you for purchasing this Black & Decker product. Your product is warranted against faults and manufacture when used in normal domestic use for a period of one year. In non-domestic use Black & Decker limits the voluntary warranty to three months. Black & Decker undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.
New Zealand CDB Media Ltd. PO Box 100-707 North Shore Mail Centre Auckland, 0745 Tel. +64 (0)9 917 4000 Tel. 0800 232 633 Email info@cdb.co.nz Monday – Friday 8am-5pm Australia CDB Goldair Australia PTY PO Box 574 South Morang Victoria, 3752 Tel. +61 (0)3 9365 5100 Tel. 1300 465 324 Email info@cdbgoldair.com.
