UK Ireland Australia New Zealand
Intended use English X Your Black & Decker light bar has been designed for providing illumination for DIY projects and leisure use. This product is intended for consumer use only. X Safety instructions Warning! When using battery-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, leaking batteries, personal injury and material damage. X Read all of this manual carefully before using the appliance.
Fail-safe isolating transformer. The mains supply is electrically separated from the transformer output. When disposing of batteries, follow the instructions given in the section "Protecting the environment". X Under extreme conditions, battery leakage may occur. When you notice liquid on the batteries, carefully wipe the liquid off using a cloth. Avoid skin contact. X In case of skin or eye contact, follow the instructions below.
X The red battery status LED (3) will illuminate to show that the product is charging (do not charge for more than 10 hours). Use Using the hook (fig. B) X The hook (1) may be used to store or suspend the light bar. The hook rotates so that the light bar (1) can be set to any position. Make sure that the hook is secure around the supporting object. Operating the light bar (fig. C) X To illuminate half of the LED's move the on/off/brightness switch (4) to the position.
Technical data Input voltage Vdc Input current mA Weight kg Battery Type Charger Input Vac Approx. charging h time Weight kg X BDBB26 12 300 max 0.46 3.6V 1.5Ah SLA 230 10 0.2 EC declaration of conformity BDBB26 Black & Decker declares that these products conform to: Standards & Legislation. 2006/95/EC, 89/336/EEC, 95/54/EC, EN60335, EN61000, EN60598, EN61347, EN55014 X X X The product has been used for trade, professional or hire purposes. The product has been subjected to misuse or neglect.
$XVWUDOLD 1HZ =HDODQG 8QLWHG .
