AIRSWIVEL™ ULTRA LIGHT WEIGHT UPRIGHT VACUUM CLEANER INSTRUCTION MANUAL MODEL NUMBERS BDASL100 Series BDASL200 Series Thank you for choosing BLACK+DECKER! PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON. If you have a question or experience a problem with your BLACK+DECKER purchase, go to http://www.blackanddecker.com. If you can’t find the answer or do not have access to the Internet, call 1-800-524-6716 from 9 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
IMPORTANT SAFETY INSTRUCTION SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
DO turn off controls before you connect or disconnect the appliance to or from the mains supply. DO disconnect the appliance from the power supply when not in use, before changing the filters, cleaning the filters or connecting/disconnecting the accessories. DO use only on dry, indoor surfaces. DO use only as described in this manual. Use only manufacturer’s recommended attachments. DO keep cord away from heated surfaces. DO keep all openings free of dust, lint. hair, and anything that may reduce airflow.
IMPORTANT SAFETY INSTRUCTION CONT. READ AND SAVE THESE INSTRUCTIONS Symbols • The labels on your tool may include the following symbols. The symbols and their definitions are as follows: V........................volts A........................amperes Hz......................hertz W.......................watts min.....................minutes or AC.............alternating current or DC..........direct current no.......................no load speed .......................Class I Construction .................
Product View 1 2 12 3 4 11 10 7 5 9 6 1.. Handle 2.. Dust cup release 3.. Dust cup 4.. Hose 5.. Power on/off 6.. Nozzle 7.. Filter cover 8 8.. Wheel 9.. Connecting hose 10.. 2-in-1 crevice tool with brush 11. Power cord 12..
Assembly Please Note: Always remove the plug from the power outlet before fitting or removing accessories. Ensure all filters are fitted, and fitted correctly before using. WARNING: DO NOT plug in your vacuum cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operation procedures. 222 111 333 222 111 Remove the dust cup before installing handle. Insert the handle into the vacuum body, then rotate the screw into body as shown.
Operation 22 22 11 11 Twist the quick release cord hook to release the power cord. Step on the brush cover and pull back on handle to engage for operation. Plug in your machine and push ON/OFF button to switch ON/OFF. To maintain optimal performance, please emtpy dust cup when debris reaches MAX FILL line.
Operation The hose can be used immediately. Remove hose and 2-in-1 crevice tool accessory from the machine. At the same time, you can insert the 2-in-1 crevice tool into the hose to extend the distance. Accessories 2-in-1 Crevice tool with brush The 2-in-1 crevice tool with brush allows for vacuuming in narrow and hard-to-reach places.
Maintenance And Care - Emptying WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Emptying and cleaning the dust cup Press dust cup release button to remove the dust cup. Hold dust cup over garbage bin and unclip the lock on the bottom of the cup, allowing the dust to empty. Close the base of the dust cup, align the cup base back onto the machine and push until it clicks back into place.
Maintenance And Care - Cleaning Exhaust Filter Maintenance MaintenanceAnd AndCare Care- -Cleaning CleaningExhaust ExhaustFilter Filter 11 LOCK LO CK Locate and unlock filter cover as shown. Locate and unlock filter cover asasshown. Locate and unlock filter cover shown. Push left totoun-lock, right to lock. Push left right totolock. Push left toun-lock, un-lock, right lock. 22 22 33 33 filter filtercover cover filter cover filter filter filter Remove filter cover with filter.
Maintenance And And Care Care -- Cleaning Cleaning Dust Dust Cup Cup Filter Filter 5. H Hand 5. and wash wash the the foam foam filter. filter. 6. 6. Allow Allow filter filterto todry dry24 24 hours before before putting putting back into into vacuum vacuum cleaner. Twistfilter filterassembly assembly 7.7.Twist counterclockwise to remove counterclockwise cleaning dirt and debris tofor remove for cleaning from filterfrom assembly as dirt andthe debris needed. the filter assembly as needed.
Maintenance And Care - Cleaning Vacuum And Tools DO NOT clean the vacuum cleaner, components or accessories using petroleum or any other flammable liquid or solvents, etc. Clean only the outside of the vacuum cleaner. Use only a moist cloth and mild detergent for cleaning the vacuum cleaner, components and accessories. After cleaning, wipe off the moisture on vacuum cleaner, components and accessories with a dry cloth. DO NOT place accessories, tools or components in a dishwasher.
Maintenance And Care - Replace Brush Roll WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. You should check your cleaner’s brush roll and drive belt regularly for wear or damage. You should also clean the brush and brush ends by removing string, hair and carpet fibers. These can wrap around the brush and hamper its ability to effectively clean your carpet. Also remove any debris that has accumulated under the brush cover. 1.
Maintenance And Care -- Replace Replace Drive Drive Belt Belt WARNING: WARNING: Turn off off and and unplug unplug vacuum vacuum cleaner cleaner before before performing performing Turn maintenancetotothe thevacuum vacuumcleaner. cleaner. maintenance Check Check the the drive drive belt belt carefully carefully for forwear, wear,cuts cutsand andstressed stressedareas. areas.IfIfthe thedrive drivebelt belt appears worn, worn, you you will will need need to toreplace replaceit.it.
Troubleshooting WARNING: To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting to the vacuum cleaner. Vacuum cleaner won’t run: Possible causes Remedies 1. Vacuum cleaner is not plugged in 2. Blown fuse/tripped breaker 1. Check electrical plug 2. Check/replace fuse or reset breaker Vacuum cleaner won’t pick up dirt: Possible causes Remedies 1. 2. 3. 4. 5. 1. Empty dust cup 2. Remove debris and clean 3.
WARRANTY ONE-YEAR LIMITED WARRANTY Black & Decker (U.S.) Inc. warranties this product to be free from defects in material or workmanship for a period of one (1) year following the date of purchase, provided that the product is used in a home environment. This limited warranty does not cover failures due to abuse, accidental damage or when repairs have been made or attempted by anyone other than BLACK+DECKER authorized service agent.
