Use and Care Manual

Page 17
ENGLISH
INSTALLATION INSTRUCTIONS
WARNING:
1. Plug the power cord into an AC 120V/60Hz wall socket rated at 15 amps or
higher. Use the socket for this washer dryer combo unit only.
2. Do not use an extension cord.
- Sharing a wall socket with another appliance, using a power strip, or extending
the power cord may result in electric shock or re.
- Do not use an electric transformer. It may result in electric shock or re.
- Ensure that the power voltage, frequency, and current match the product’s
specications. Failing to do so may result in electric shock or re.
3. Have this appliance installed by a qualied technician or service company.
- Failing to do so may result in electric shock, re, explosion, problems with the
product, or injury.
4. Remove all foreign substances such as dust or water from the power plug
terminals and contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failing to do so may result in electric shock or re.
5. Plug the power plug into the wall socket rmly. Do not use a damaged power
plug, or loosen wall socket.
- This may result in electric shock or re.
6. Do not pull or excessively bend the power cord.
7. Do not twist or tie the power cord.
8. Do not hook the power cord over a metal object, place a heavy object on the
power cord, insert the power cord between objects, or push the power cord into
the space behind the appliance.
- This may result in electric shock or re.
9. Do not pull the power cord when unplugging the power plug.
- Unplug the power plug by holding the plug.
- Failing to do so may result in electric shock or re.
10. If the power plug or power cord are damaged, contact your nearest service
center.
11. Do not install this appliance near a heater or inammable material.
12. Do not install this appliance in a humid, oily, or dusty location, or in a location
exposed to direct sunlight or water (rain drops).
13. Do not install this appliance in a location where gas may leak.
- This may result in electric shock or re.
14. If the washer is moved to a new location, have it checked and re-installed by a
qualied service technician.
- Failing to follow this warning may result in electric shock or re.
INSTALLATION WARNINGS
AND PRECAUTIONS