User Manual

(Übersetzung der ursprünglichen
Anweisungen)
DEUTSCH
10
ENGLISH
(Original instructions)
u Always hold the tool and screwdriver bit in a straight line
with the screw
Troubleshooting
Problem Possible cause Possible solution
Unit will not start. Battery pack not
charged.
Check battery pack charg-
ing requirements
Battery pack will not
charge.
Charger not plugged
in.
Surrounding air
temperature too hot or
too cold.
Plug charger into a work-
ing outlet.
Move charger and battery
pack to a surrounding air
temperature of above 40
degrees F (45ºC) or below
105 degrees F (+40.5ºC)
Unit shuts off
abruptly.
Battery pack has
reached its maximum
thermal limit.
Out of charge. (To
maximize the life of
the battery pack it is
designed to shutoff
abruptly when the
charge is depleted
Allow battery pack to cool
down.
Place on charger
and allow to charge.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
u Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
u Regularly open the chuck and tap it to remove any dust
from the interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
Technical data
BCD003
Voltage V
DC
18
No-load speed Min
-1
0-360/0-1400
Max. torque Nm 45
Chuck capacity mm 1-10
Max Drilling capacity
Steel/wood/Masonary mm 10/25/10
Weight kg 0.9
Charger 905902** 906349**
Input voltage V
AC
230 230
Output voltage V
DC
18 18
Current mA 400 1A
Approx. charge time Hours 3 - 5 1.5
Battery BL1518
Voltage V
DC
18
Capacity Ah 1.5
Type Li-Ion
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) 86.0 dB(A), uncertainty (K) 5 dB(A)
Sound power (L
WA
) 97.0 dB(A), uncertainty (K) 5 dB(A)
Vibration total values (triax vector sum) according to EN 62841:
Drilling into concrete (a
h, ID
)6.8m/s
2
,uncertainty(K)1.5m/s
2
Drilling into metal (a
h, D
)1.8m/s
2
,uncertainty(K)1.5m/s
2
Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
BCD003 - Impact drill
Black & Decker declares that these products described under
“technical data” are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597(asamended),
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091(asamended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032(asamended).