2 1 3 4 5 6 14 7 13 12 11 10 9 8 ASI500
UK, Ireland, Australia, New Zealand: • English (Original instructions)
13 15 16 8 17 9 19 26 6 18 7 20 4 10 a b c 7 21 22 23 1 3
18 24 24 7 4
Intended use Your Black & Decker inflation station is designed to be used cordless or, in most vehicles, from the standard 12 Vdc socket, to inflate car and bike tyres, balls, rafts, air mattresses and swimming pool floats etc. This product is intended for household, consumer use only.
Additional safety instructions for batteries and chargers Batteries Never attempt to open for any reason. Do not expose the battery to water. Do not expose the battery to heat. Do not store in locations where the temperature may exceed 40°C. Charge only at ambient temperatures between 10°C and 40°C. Charge only using the charger provided with the appliance/tool. When disposing of batteries, follow the instructions given in the section "Protecting the environment".
Plug the AC charger (13) into the mains power supply. The LED (15) on the AC charger (13) will indicate the level of charging. Red, unit charging, Green, unit charged. When fully charged, remove the AC charger from the mains and remove the jack plug from the unit. Note: Store your AC charger in a safe place for later use. Use Hose and cord storage (fig. B - D) Wrap the 12 Vdc cord (17) around the base of the unit and locate the 12 Vdc adapter (8) into its storage location (16) as shown in fig.
Setting the required pressure (fig.E) Note: If the main power switch is turned off, all settings will be lost and will need to be re-entered following the instructions under the heading 'Setting the required pressure'. This is a safety feature to prevent the risk of items OVER INFLATING. Using the inflator as a pressure gauge Switch the main power switch (1) to the inflate position (c fig. E). Connect the universal valve adaptor (6) to the item to be checked. The LCD will display the items pressure.
When the item is deflated or to stop the pump at any time press the power switch (22) on the LCD. Remove the high-volume hose ((7) from the item and store it in the storage channel around the centre of the unit. Turn the main power switch (1) to the off position (b fig. E). Operating the LED light To switch on the LED light (12): Switch the main power switch (1) to the inflate (c fig. E) or the pump (a fig. E) position.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
TYP. ASI500 H1 Partial support - Only parts shown available Nur die aufgefuerten teile sind lieferbar Reparation partielle - Seules les pieces indiquees sont disponibles Supporto parziale - Sono disponibili soltanto le parti evidenziate Solo estan disponibles las peizas listadas So se encontram disponiveis as pecas listadas Gedeeltelijke ondersteuning - alleen de getoonde onderdelen zijn beschikbaar 2 1 3 4 6 7 5 E15803 www.2helpU.
$XVWUDOLD %ODFN 'HFNHU $XVWUDOLD 3W\ /WG )OHWFKHU 5RDG 0RRURROEDUN 9LFWRULD 1HZ =HDODQG %ODFN 'HFNHU 7H $SXQJD 3ODFH 0W :HOOLQJWRQ $XFNODQG 8QLWHG .
