Specifications

Page 35
©
2014 Sargent and Greenleaf
Revision date: 6/23/2014
SARGENT AND GREENLEAF
®
One Security Drive, Nicholasville, Kentucky 40356 USA
Order
Number
Lock
Style
Renter Nose
Diameter
Guard Nose
Diameter
Hand of Lock Nose Height
Guard
Setting
4231-002 4231 .672" (17 mm) .672" (17 mm) left-hand 0.5" (12.7 mm) SY3
4231-008 4231 .672" (17 mm) .672" (17 mm) right-hand 0.5" (12.7 mm) SY3
4420-010 4420 .672" (17 mm) .672" (17 mm) left-hand 0.5" (12.7 mm) #4
4420-042 4420 .672" (17 mm) .672" (17 mm) right-hand 0.5" (12.7 mm) #4
4200 Series
Order
Number
Lock
Style
Renter Nose
Diameter
Guard Nose
Diameter
Hand of Lock Nose Height
Guard
Setting
4440-018 4440 .672" (17 mm) .672" (17 mm) left-hand 0.5" (12,7 mm) #4
4440-070 4440 .672" (17 mm) .672" (17 mm) right-hand 0.5" (12,7 mm) #4
4442-004 4442 .840" (21,3 mm) .672" (17 mm) left-hand 0.5" (12,7 mm) #4
4442-014 4442 .840" (21,3 mm) .672" (17 mm) right-hand 0.5" (12,7 mm) #4
4443-008 4443 .840" (21,3 mm) .840" (21,3 mm) left-hand 0.5" (12,7 mm) #4
4443-028 4443 .840" (21,3 mm) .840" (21,3 mm) right-hand 0.5" (12,7 mm) #4
4444-002 4444 .672" (17 mm) .672" (17 mm) right-hand only 0.5" (12,7 mm) #4
4400 Series
• All locks on this page are Listed by Underwriters
Laboratories under Standard 437.
• The 4200 and 4400 family of safe deposit locks represent
an industry standard trusted by financial institutions
worldwide for over 80 years.
• Factory matchwork is available upon request to match
many manufacturers’ guard keys, provided a sample of the guard key is made available to us.
• The pick resistant lever design also resists advanced decoding techniques.
• S&G
®
safe deposit locks are all key retaining for added security in daily operations.
• Two renter keys are provided with each lock. Renter sides are keyed different. Guard keys are not provided.
• All locks on this page have brass plated covers and plugs.
• The 4444 lock is designed as the primary lock for B and C-rate depository safes and for inner compartment doors. It incorporates
special burglary resistant features. Its bolt is drilled and tapped for an 8-32 machine screw to accommodate boltwork attachment.
4200 and 4400 Series Safe Deposit Locks
1.38 (35,1 mm)
1.14 (29 mm)
1.39 (35,3 mm)
2.69 (68,3) mm)
3.19 (81 mm)
4420—designed for matchwork to all Corbin
guard keys (RH model shown here)
1.28 (32.5 mm)
1.39 (35,3 mm)
1.78 (45,2 mm)
2.70 (68,6) mm)
3.19 (81 mm)
4440— a standard of the safe deposit industry since 1922
All locks on this page (with the exception of
the 4444) have an extended bolt length of .40"
(10,2 mm), with a bolt throw of .31" (7,9 mm).
These dimensions also apply to:
4231
— designed for matchwork to the Yale SY3 guard key
4442— designed for matchwork to the Diebold 175 series
4443— designed for matchwork to the Mosler 5700 series
.500
(12,7 mm)
.380 (9,5 mm)
LOCK BOLT
MOUNTING SURFACE
OF LOCK
.270 (6,9 mm)