Specifications

Page 34
©
2014 Sargent and Greenleaf
SARGENT AND GREENLEAF
®
One Security Drive, Nicholasville, Kentucky 40356 USA
Revision date: 6/23/2014
Order Number Keys Included Notes
6870-016 3 keys are for a maximum door thickness of 2.26" (57,4 mm)
6870-008 2 keys are for a maximum door thickness of 4.22" (107,1 mm)
6870-028 4 keys are for a maximum door thickness of 4.22" (107,1 mm)
6870 Locks with Keys
Two Key Set Three Key Set Four Key Set Notes
6870-112 6870-113 6870-114 pre-cut keys for 2.26" (57,4 mm) max door thickness
6870-132 6870-133 6870-134 pre-cut keys for 4.22" (107,1 mm) max door thickness
6870-202 6870-203 6870-204 pre-cut bit sets for use with 6870-200 stem
6870 Pre-Cut Key Sets
6870-310
ESCUTCHEON
6870-320 ESCUTCHEON
WITH COVER
Order Number Notes
6870-200 key stem only for detachable bit for 7.57" (192,3 mm) maximum door thickness
6870-201 uncut detachable bit for use with key stem listed above
Detachable Bits
Order Number Notes
6870-110 for 2.26" (57,4 mm) max door thickness
6870-130 for 4.22" (107,1 mm) max door thickness
Key Blanks
6870-370 Guide Tube—Guides the key into the lock, and is suitable for thick doors and insulated doors.
Tube length is 1 meter, and can easily be cut to length. The tube is an option and is not included with locks. It
requires a 5/8 inch (0.625" or 15,9 mm) hole through the safe door and an escutcheon.
• Underwriters Laboratories Listed under Standard 437 as a Security Container Lock.
• Same mounting footprint as S&G
®
standard size combination locks, with the key hole in the same place as the spindle hole. Key
hole through the safe door must be at least 1/2" (12,7 mm) in diameter, or a minimum of 5/8" (15,9 mm) if a guide tube is used.
• True double-bitted lock with nine opposing brass levers and a mechanism that permits changing to new keys in seconds, with no
special tools.
6870 Series Key Operated Safe Lock
KEY STEM
KEY BIT
PRE-CUT KEYS