Operating Guide

PWASH20 20 Gallon Parts Washer Assembly & Operating Instructions
6
Never us
Use w ent is nonflammable, it has been
. It contains no flash point and autoignition temperatures.
an 7.
ool service must be performed only by qualified repair personnel. Service or maintenance by unqualified personnel
risk of injury.
this product. Before
se, read carefully and understand all warnings, cautions, instructions and labels. Failure to do so could result in serious
e items to support the lid.
ater based solvents only in the Parts Washer. The water based solv
investigated and tested and can be used safely
These solvents have a PH of more th
SERVICE
T
could result in a
When servicing a tool, use only identical replacement parts and follow instructions in the manual. Use of
unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This manual contains important information regarding safety, operation, maintenance and storage of
u
personal injury, property damage or even death.
IMPORTANT SAFETY INSTRUCTIONS
r with its operation. If you are unsure about the
roper use, call the Customer Service Department
at 1-888-287-6981. Follow these instructions for safe handling of the tool:
or
Before using this tool, you need to become familia
operation of the tool, or have any questions about its p
• Always secure and support the work piec De using clamps. o not use your hands to hold the
piece in place.
• Be sure your work area is clean and secure before turning the power switch into the “ON”
position. Be sure the area is free from all foreign material, nails, stap
les, or any other material.
• Turn the Parts Washer “OFF” and unplug from the power source before making any changes
adjustments.
• Do not use solvents containing carbon tetrachloride, ammonia or acetone to clean the unit.
Never use gasoline, paint thinner, or other caustic chemicals that can damage the unit.
• Always use the appropriate safety gear when operating this parts washer. Including but not
limited, to gogg
les, dust mask or respirator. Always work in a well-ventilated area to reduce your
exposure to harmful chemicals and dust particles.
ep hands away from the cutting area.
• Ke
• Do not reach under the work piece.
SPECIFIC SAFETY RULES AND/OR SYMBOLS
he following symbols may be used on your tool. Be familiar with and learn the symbols to operate the tool safely.
cription
T
Symbol Name Des
V Volts Voltage (Potential)
A Amperes Current
Hz Hertz Frequency (Cycles per Second)
W Watt Power
K g Kilograms Weight
Alternating Current Type of Current
Direct Current Type of Current
Alternating or Direct Current Type of Current
Earthing Terminal g Terminal Groundin
Class II Construction Insulation Denotes Double
min Minutes Time
s Seconds Time
Diameter Size of Drill Bits, Grinding Wheels, etc.
No Load Speed No-load Rotational Speed
…/min ns per Minute tions, Surface Speed, Strokes, etc. per Minute Revolutio Revolu
1,2,3… tor Settings , Torque or Position Settings Ring Selec Speed