Specifications

724-746-5500 | blackbox.com
Page 12
4 Description
The basic housing has a 10/100/1000TX Ethernet connection and two USB
ports (USB 1 and USB 2) for KVM applications as well.
The console port is exclusively for maintenance work and not user-
accessible.
The reset button on the left returns the device to factory default setting if
required. Press this button for at least 5 seconds until the green power LED
starts flashing to signal a reboot.
The DVI module has two connections: Video In and Video Out. The
VX-HDV-IP can be configured as encoder or as decoder. Only one
connection can be activated at a time.
 The quality of the video cable can influence the video image quality!
The LED of the configured port stays red if no connection is detected. This
indicates whether it is configured as encoder or decoder, because the LED
only goes green if the VX-HDV-IP detects a recognizable connection. The
port is then ready for use.
Front view of VX-HDV-IP with DVI module
Reset
USB for KVM
Ethernet port
Power
LED
Video in LEDs DVI Video out
Reserve slot for
audio module
Reset
USB for KVM
Ethernet port
Power
LED
Video in LEDs DVI Video out
Reserve slot for
audio module
The VX-HDV-IP has two 12VDC power inputs, one of which redundant. Both
power inputs are monitored by a switch contact, which closes in order to
signal any power failure, for example to a control system.
Rear view of VX-HDV-IP