Ethernet Router / BridgeUser Manual Version 1.0
Table Of Contents
- VERSION CONTROL
- INTRODUCTION
- SPECIFICATION
- TECHNOLOGIES
- DESCRIPTION OF THE DEVICE
- MECHANIC DESIGN
- EQUIPMENT INSTALLATION
- PROGRAMMING GUIDE
- Introduction
- Main menu of the bridge mode
- Main menu of the router mode
- FIRMWARE LOADING
- TECHNICAL SPECIFICATIONS
- CONNECTORS’ DESCRIPTION
- DESCRIPTION OF INTERFACE CABLES
- DELIVERY SET
- GLOSSARY
- EXAMPLE OF NETWORK CONFIGURATION
3 SPECIFICATION
• High-speed symmetric data transfer over a 135-ohm physical twisted copper pair according to
G.shdsl ITU G.991.2;
• TC-PAM line encoding;
• line speed from 72 Kbit/s to 2320 Kbit/s;
• automatic and manual line speed adjusting;
• Ethernet 10Base T interface;
• bridge and router function;
• built-in 4-port HUB on;
• AAL5 for ATM over SHDSL;
• function of traffic priorities;
• DNS support;
• built-in DHCP server;
• NAT support;
• static and dynamic routing, RIP;
• built-in function of diagnostics and self-testing;
• low power consumption;
• console port for local management;
• TELNET and HTTP management;
• built-in SNMP agent;
• possibility of remote firmware loading through TFTP protocol;
• different types of mechanic design.
Version: 1.0 Page. 8 of 95