Ethernet Router / BridgeUser Manual Version 1.0
Table Of Contents
- VERSION CONTROL
- INTRODUCTION
- SPECIFICATION
- TECHNOLOGIES
- DESCRIPTION OF THE DEVICE
- MECHANIC DESIGN
- EQUIPMENT INSTALLATION
- PROGRAMMING GUIDE
- Introduction
- Main menu of the bridge mode
- Main menu of the router mode
- FIRMWARE LOADING
- TECHNICAL SPECIFICATIONS
- CONNECTORS’ DESCRIPTION
- DESCRIPTION OF INTERFACE CABLES
- DELIVERY SET
- GLOSSARY
- EXAMPLE OF NETWORK CONFIGURATION
No. i/f name|WanIP Port/Protocol Server IP
1 pppoa 434/udp 192.62.2.134
2 210.62.2.195 232/tcp 192.62.2.166
> pat>
Command format: show
Definitions:
Interface: The used interface.
IP address: Interface IP address.
No. The table serial number.
i/f name|WanIP The interface name | WAN address.
Port/Protocol: Port and transmission protocol.
Server IP The server IP address.
8.3.9 Ping command
See 8.2.8
8.3.10 Pppoa command
The pppoa command puts the system into the menu of PPP over ATM settings.
>> pppoa
> pppoa>
Command format: pppoa [adduser [<vpi>/]<vci> <userid> [<chap|pap>] | chpass | deluser | echo
<interval time> | setllc <e>nable|<d>isable | setqos <ubr|cbr> | setrip <1|2|1&2|0> | show]
Parameter:
Adduser: See 8.3.10.1
Chpass: See 8.3.10.2
Deluser: See 8.3.10.3
Echo See 8.3.10.4
Setllc: See 8.3.10.5
Setqos: See 8.3.10.6
Setrip: See 8.3.10.7
Show: See 8.3.10.8
Version: 1.0 Page. 70 of 95